Single longitudinal mode lasers by using artificially controlled backscattering erbium doped fibers
In this work, we propose and experimentally demonstrate a new distributed short linear cavity fiber laser. At one of the cavity ends, fabricated by a commercial femtosecond fiber laser chirped pulse amplfier, an artificially controlled backscattering erbium doped fiber section has been connected. Th...
| Authors: | , , , , |
|---|---|
| Format: | article |
| Status: | Published version |
| Publication Date: | 2021 |
| Country: | España |
| Institution: | Universidad Pública de Navarra |
| Repository: | Academica-e. Repositorio Institucional de la Universidad Pública de Navarra |
| OAI Identifier: | oai:academica-e.unavarra.es:2454/39598 |
| Online Access: | https://hdl.handle.net/2454/39598 |
| Access Level: | Open access |
| Keyword: | Distributed amplifier Erbium-doped fiber amplifier Fiber laser Laser cavity resonator |
| Summary: | In this work, we propose and experimentally demonstrate a new distributed short linear cavity fiber laser. At one of the cavity ends, fabricated by a commercial femtosecond fiber laser chirped pulse amplfier, an artificially controlled backscattering erbium doped fiber section has been connected. This distributed reflector acts also as a saturable absorber, leading to the generation of tunable and switchable single longitudinal-mode laser emissions. The distributed reflector consists of 9 micro-drilled sections of about 1cm each one and randomly spread throughout 2 meters of highly doped erbium fiber. The total length of the fiber laser is 9.5 m and the laser shows a single mode behavior at all the emitted wavelengths. Using this new kind of reflecting saturable absorber, single and multiple single-mode emissions can be obtained. The achieved laser presents a pump threshold as low as 45 mW and shows up to 8 different single-mode emission lines with an optical signal to noise ratio of 45dB. |
|---|