High-temperature stability of hot-pressed Sr-doped Ca3Co4O9

Bulk textured Ca2.93Sr0.07Co4O9 samples have been prepared by hot uniaxial pressing followed by thermal treatment at 800°C under air for between 0 h and 1532 h. The microstructural, thermoelectric, and mechanical properties as well as density of all the samples were evaluated as a function of the du...

ver descrição completa

Detalhes bibliográficos
Autores: Madre, M. A., Urrutibeascoa, Idoia, Garcia, Gustavo, Torres, M. A., Sotelo, Andres, Diez, J. C.
Formato: artículo
Estado:Versión aceptada para publicación
Fecha de publicación:2019
País:España
Recursos:Consejo Superior de Investigaciones Científicas (CSIC)
Repositorio:DIGITAL.CSIC. Repositorio Institucional del CSIC
OAI Identifier:oai:digital.csic.es:10261/181589
Acesso em linha:http://hdl.handle.net/10261/181589
Access Level:acceso abierto
Palavra-chave:Thermoelectricity
Cobalt oxides
Flexural strength
Power factor
Thermal stability
Descrição
Resumo:Bulk textured Ca2.93Sr0.07Co4O9 samples have been prepared by hot uniaxial pressing followed by thermal treatment at 800°C under air for between 0 h and 1532 h. The microstructural, thermoelectric, and mechanical properties as well as density of all the samples were evaluated as a function of the duration of thermal treatment. Scanning electron microscopy characterization showed that the samples were mainly composed of Sr-doped Ca3Co4O9 thermoelectric (TE) phase, accompanied by minor amounts of Sr-free Ca3Co2O6 secondary phase. After an initial decrease of density after the first aging treatment, it remained practically constant for longer durations. This behavior is reflected in the mechanical properties, which slightly decreased after 12 h of thermal treatment, compared with the as-hot-pressed state, but remained practically constant after larger durations. However, the TE properties were not affected by the aging process, lying within typical errors independently of the aging duration. Moreover, the power factor values measured at 850°C (> 0.60 mW/K2 m) lie among the highest obtained so far for this kind of material.