Poly(carboxylated ether)s as Cement Additives: The Effect of the Addition Method on Hydration Kinetics
Polycarboxylate ether (PCE) superplasticisers have been widely used in cement formulations. However, it is not until recently that several studies have analysed the relationship between the properties and the molecular structure. In the present work, PCEs with different side chain lengths and charge...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2024 |
| País: | España |
| Institución: | Universidad del País Vasco |
| Repositorio: | Addi. Archivo Digital para la Docencia y la Investigación |
| OAI Identifier: | oai:addi.ehu.eus:10810/70398 |
| Acceso en línea: | http://hdl.handle.net/10810/70398 |
| Access Level: | acceso abierto |
| Palabra clave: | hydration kinetics PCE superplasticizer direct addition delayed addition ordinary portland cement |
| Sumario: | Polycarboxylate ether (PCE) superplasticisers have been widely used in cement formulations. However, it is not until recently that several studies have analysed the relationship between the properties and the molecular structure. In the present work, PCEs with different side chain lengths and charge densities synthesised through free radical copolymerisation are used to analyse the effect they have on the hydration of ordinary Portland cement (OPC). It was found that the addition method of these PCEs to the OPC significantly affects the hydration kinetics of the cement paste. When PCEs are added through the direct addition method, a linear dependency between the retardation of hydration and the microstructure of the used PCEs is observed. On the contrary, when PCEs are added through the delayed addition method (PCEs are added to the cement paste 5 min after water), no retardation in hydration is observed, but the rate of hydration is reduced. |
|---|