Hierarchically patterned multiphase steels created by localised laser treatments
The realisation of sophisticated hierarchically patterned multiphase steels has the potential to enable unprecedented properties in engineering components. The present work explores the controlled creation of patterned multiphase steels in which the patterns are defined by two different crystal stru...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Universidad de Castilla-La Mancha |
| Repositorio: | RUIdeRA. Repositorio Institucional de la UCLM |
| OAI Identifier: | oai:ruidera.uclm.es:10578/41227 |
| Acceso en línea: | https://doi.org/10.1016/j.matdes.2022.110984 https://hdl.handle.net/10578/41227 |
| Access Level: | acceso abierto |
| Palabra clave: | Austenite Flash heating Laser material processing Local heat treatment Martensite Patterned microstructures |
| Sumario: | The realisation of sophisticated hierarchically patterned multiphase steels has the potential to enable unprecedented properties in engineering components. The present work explores the controlled creation of patterned multiphase steels in which the patterns are defined by two different crystal structures: face centre cubic or fcc (austenite) and body centre cubic or bcc (martensite). These austenite/martensite mesostructures are generated by solid–solid phase transformations during the application of localised laser heat treatments in a Fe-Ni-C alloy. In particular, four patterned configurations are analysed in this work consisting of one or two horizontal austenite line structures imprinted in a base of as-quenched or tempered martensite. Digital image correlation analysis during tensile testing of the developed materials showed that both the strength of the base martensite and the mesostructure at the gauge have a strong effect on the resulting properties. Clear differences were observed among the configurations in strain partitioning, hardening of the different constituents and failure. The uniform elongation and tensile strength are increased with respect to that of the reference martensite and austenite, respectively. Concepts explored in this work can be extended to more complex patterns and other base microstructures, opening novel strategies to engineer properties in steel and other alloys. |
|---|