Development of hybrid hierarchical coatings on Mg3Zn0.4Ca alloy for orthopaedic implants
A hybrid hierarchical coating (HHC) biodegradable system, consisting of a ceramic (PEO) and a biodegradable microporous polymeric (PLA or PCL) layers, was developed on Mg3Zn0.4Ca alloy and evaluated under quasi-in vivo conditions. The polymer top-coat was produced using the Breath Figures approach b...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universidad Complutense de Madrid (UCM) |
| Repositorio: | Docta Complutense |
| Idioma: | inglés |
| OAI Identifier: | oai:docta.ucm.es:20.500.14352/108285 |
| Acceso en línea: | https://hdl.handle.net/20.500.14352/108285 |
| Access Level: | acceso abierto |
| Palabra clave: | 66 Hybrid coatings Magnesium Polymer Biodegradable Plasma electrolytic oxidation Microporous surface Química 3312 Tecnología de Materiales 3303 Ingeniería y Tecnología Químicas |
| Sumario: | A hybrid hierarchical coating (HHC) biodegradable system, consisting of a ceramic (PEO) and a biodegradable microporous polymeric (PLA or PCL) layers, was developed on Mg3Zn0.4Ca alloy and evaluated under quasi-in vivo conditions. The polymer top-coat was produced using the Breath Figures approach by dip-coating the PEO treated ceramic surface onto a PLA/PCL polymer solution and withdraw under high relative humidity. According to our findings, when the polymer coating is applied directly onto the PEO layer using high humidity a negligible corrosion protection was observed. However, this issue was overcome by first applying a thin sealing polymer layer before the microporous polymer layer prepared by dip-coating in the absence of moisture. The HHC system improves the corrosion resistance by 10–12 times compared to the stand-alone PEO coating and, due to its inherent porosity, should be amenable for further functionalization with pharmaceutical agents. |
|---|