Wool waste used as sustainable nonwoven for building applications

[EN] Reusing textile waste in building applications has the potential to reduce the environmental impact of two sectors considered the main sources of environmental pollution: the textile and the construction industries. Thus, the main goal of the present research study is to assess the potential co...

Descripción completa

Detalles Bibliográficos
Autores: RUBINO, C., LIUZZI, S., Stefanizzi, P., Martellotta, F., Bonet-Aracil, Marilés|||0000-0002-8743-560X
Tipo de recurso: artículo
Fecha de publicación:2021
País:España
Institución:Universitat Politècnica de València (UPV)
Repositorio:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:inglés
OAI Identifier:oai:riunet.upv.es:10251/166739
Acceso en línea:https://riunet.upv.es/handle/10251/166739
Access Level:acceso abierto
Palabra clave:Textile waste recycling
Bicomponent fibers as binder
Thermal insulator
Acoustic absorber
INGENIERIA TEXTIL Y PAPELERA
Descripción
Sumario:[EN] Reusing textile waste in building applications has the potential to reduce the environmental impact of two sectors considered the main sources of environmental pollution: the textile and the construction industries. Thus, the main goal of the present research study is to assess the potential conversion of wool waste into new raw materials suitable for building components. Hence, hygrothermal, acoustic and nonacoustic properties of nonwovens consisting of 100% wool waste fibers thermally bonded with polyester/copolyester bi-component fibers were explored. Five different density values (51, 90, 115, 136 and 167 kg/m(3)) were examined. Absorption coefficients ranging from 0.7 to almost 1 were measured above 1 kHz using 50 mm thick samples; thermal conductivity values from 0.044 to 0.057 W/(m.K) were obtained and a water vapour permeability close to 2.10(-11) kg/(m.s.Pa) was found. Furthermore, a comparison between nonwovens under test and other previously experimented materials was carried out. Measurement results showed that the manufacturing processes mainly affected the sound absorption coefficients and the hygric properties of the fibrous nonwovens. Comparison between tested materials and those currently available on the market allows to state that the tested nonwovens may represent a valid alternative for building applications, thus opening a new research area. (C) 2020 Elsevier Ltd. All rights reserved.