Effects of microwave sintering in aging resistance of zirconia-based ceramics
[EN] Innovative techniques for materials processing that result in shorter times and lower energy consumption than conventional methods, such as microwave sintering, are currently under investigation in order to obtain fully-consolidated ceramic materials. Microwave sintering has important effects o...
| Autores: | , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2017 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/99742 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/99742 |
| Access Level: | acceso abierto |
| Palabra clave: | Microwave sintering Zirconia-based ceramics Low-temperature degradation Alumina-zirconia composites CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA TEORIA DE LA SEÑAL Y COMUNICACIONES |
| Sumario: | [EN] Innovative techniques for materials processing that result in shorter times and lower energy consumption than conventional methods, such as microwave sintering, are currently under investigation in order to obtain fully-consolidated ceramic materials. Microwave sintering has important effects on the resulting properties of zirconia-based ceramics, which, in turn, affectits performance and durability, as in the case of their susceptibility to low temperature hydrothermal degradation (LTD), an ageing phenomenon that deteriorates their mechanical performance. The purpose of this work consists on assessing the effects of microwave sintering on the microstructure and mechanical performance of zirconia composites by comparing itto conventional sintering. Resistance to LTD of 3Y-TZP-only materials has also been evaluated. The results obtained in this work suggest that microwave sintering can reduce processing times and sintering temperatures when compared to conventional sintering while still obtaining dense zirconia-based ceramics and complying with the expected mechanical properties. At the same time, an increase in the resistance to LTD is also observed. |
|---|