Urethane-acrylate/aramid nanocomposites based on graphenic materials. A comparative study of their mechanical properties
Urethane-acrylate thermoset resins (UATR) are a new type of polymeric matrix that have recently made a strong breakthrough in the composites sector. This is because of their properties, which make them an advantageous alternative to epoxy resins, especially if they are reinforced with high-performan...
| Authors: | , , , |
|---|---|
| Format: | article |
| Status: | Published version |
| Publication Date: | 2020 |
| Country: | España |
| Institution: | Universidad Politécnica de Cartagena(UPCT) |
| Repository: | Repositorio Digital UPCT |
| OAI Identifier: | oai:repositorio.upct.es:10317/9437 |
| Online Access: | http://hdl.handle.net/10317/9437 https://www.mdpi.com/2073-4360/12/10/2388 |
| Access Level: | Open access |
| Keyword: | Graphenic materials Graphene nanocomposites Urethane-acrylate/aramid Mechanical properties Ingeniería Química 3312.08 Propiedades de Los Materiales |
| Summary: | Urethane-acrylate thermoset resins (UATR) are a new type of polymeric matrix that have recently made a strong breakthrough in the composites sector. This is because of their properties, which make them an advantageous alternative to epoxy resins, especially if they are reinforced with high-performance fibers such as aramids. Graphene-based nanocomposites are one of the most dynamic research fields in nanotechnology, because graphenic materials greatly improve the properties of traditional composites. This work represents a comparative study of the effect of adding three types of graphenic materials on the mechanical properties of UATR/aramid composites. Several UATR polymeric matrices were doped at 2% w/w with graphene nanoplatelets (GNPs), reduced graphene oxide (rGO) and pristine few-layer graphene (FLG), and reinforced with Twaron CT709 para-aramid fibers. The obtained laminates showed low density (1.38 g·cm−3), a high volumetric fiber–resin ratio (80:20), homogeneous dispersion of the nanoreinforcement, high reproducibility, and easy scalability. The tensile, flexural and impact strength properties of the undoped composite and the graphene-doped nanocomposites were determined. FLG-doped nanocomposites showed the highest increase in all the mentioned mechanical properties and attained a very significant relative improvement over the undoped laminate (up to 134.4% in aCU) |
|---|