Embedded thermocouple wall temperature measurement technique for scraped surface heat exchangers
Heating and cooling processes involving viscous fluids, crystallization processes or with fouling tendency require often the employment of scraped surface heat exchangers to enhance the heat transfer. In these cases, obtaining the heat transfer coefficient is complex due to the difficulty of measuri...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2017 |
| País: | España |
| Institución: | Universidad Politécnica de Cartagena(UPCT) |
| Repositorio: | Repositorio Digital UPCT |
| OAI Identifier: | oai:repositorio.upct.es:10317/13368 |
| Acceso en línea: | http://hdl.handle.net/10317/13368 https://www.sciencedirect.com/science/article/pii/S1359431116339874 |
| Access Level: | acceso abierto |
| Palabra clave: | Wall temperature Thermocouple Scraped surface heat exchanger Heat transfer enhancement Ingeniería Mecánica |
| Sumario: | Heating and cooling processes involving viscous fluids, crystallization processes or with fouling tendency require often the employment of scraped surface heat exchangers to enhance the heat transfer. In these cases, obtaining the heat transfer coefficient is complex due to the difficulty of measuring the wall temperature. The present work introduces an innovative measurement technique to retrieve the scraped wall temperature based on embedded thermocouples, welded directly into the wall plate. The thermocouple wires were introduced into a knockout and welded with a filler material. Once welded, the entire set was calibrated in a cold room at controlled temperature. A total of 26 T-type thermocouples were welded to a stainless steel wall substrate, tested later in a rotating scraped surface heat exchanger employed in the ice slurry production. The thermocouples presented a variance of 0.3 °C and an accuracy after calibration of 0.2 °C. The deviation between the scraped wall temperature and the thermocouple measurement was assessed by 2D numerical simulations of the transient heat conduction across the wall substrate. The influence of the wall substrate thickness, thermocouple location and scraping velocity has been considered. |
|---|