Development of a low-cost system for the accurate measurement of structural vibrations

Nowadays, engineers are widely using accelerometers to record the vibration of structures for structural verification purposes. The main obstacle for using these data acquisition systems is their high cost, which limits its use to unique structures with a relatively high structural health monitoring...

Descripción completa

Detalles Bibliográficos
Autores: Komarizadehasl, Seyedmilad|||0000-0002-9010-2611, Mobaraki, Behnam|||0000-0002-2924-643X, Ma, Haiying, Lozano Galant, José Antonio, Turmo Coderque, José|||0000-0001-5001-2438
Tipo de recurso: artículo
Fecha de publicación:2021
País:España
Institución:Universitat Politècnica de Catalunya (UPC)
Repositorio:UPCommons. Portal del coneixement obert de la UPC
Idioma:inglés
OAI Identifier:oai:upcommons.upc.edu:2117/353313
Acceso en línea:https://hdl.handle.net/2117/353313
https://dx.doi.org/10.3390/s21186191
Access Level:acceso abierto
Palabra clave:Structural health monitoring
Arduino
Structural Health Monitoring (SHM)
Internet of Things (IoT)
Accelerometer
Low-cost sensors
Monitorització de salut estructural
Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures
Descripción
Sumario:Nowadays, engineers are widely using accelerometers to record the vibration of structures for structural verification purposes. The main obstacle for using these data acquisition systems is their high cost, which limits its use to unique structures with a relatively high structural health monitoring budget. In this paper, a Cost Hyper-Efficient Arduino Product (CHEAP) has been developed to accurately measure structural accelerations. CHEAP is a system that is composed of five low-cost accelerometers that are connected to an Arduino microcontroller as their data acquisition system. Test results show that CHEAP not only has a significantly lower price (14 times cheaper in the worst-case scenario) compared with other systems used for comparison but also shows better accuracy on low frequencies for low acceleration amplitudes. Moreover, the final output results of Fast Fourier Transformation (FFT) assessments showed a better observable resolution for CHEAP than the studied control systems.