Análisis temporal y frecuencial de presiones medidas en la solera de cuencos de aliviaderos de vertido libre

[EN] Free falling jet is one of the most common energy dissipation methods used in the overtopping of dams. This work presents the time and frequency analysis of pressure measurements obtained at the bottom of a plunge pool downstream of free falling jets in an experimental facility. A relative larg...

ver descrição completa

Detalhes bibliográficos
Autores: Marco, F., Carrillo, J.M., Castillo, L.G., García, J.T.
Formato: artículo
Fecha de publicación:2019
País:España
Recursos:Universitat Politècnica de València (UPV)
Repositorio:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:español
OAI Identifier:oai:riunet.upv.es:10251/130534
Acesso em linha:https://riunet.upv.es/handle/10251/130534
Access Level:acceso abierto
Palavra-chave:Vertido libre
Cuenco de disipación
Sensores de presión
Análisis temporal
Análisis frecuencial
Free discharge
Plunge pool
Pressure sensors
Time analysis
Frequency analysis
Descrição
Resumo:[EN] Free falling jet is one of the most common energy dissipation methods used in the overtopping of dams. This work presents the time and frequency analysis of pressure measurements obtained at the bottom of a plunge pool downstream of free falling jets in an experimental facility. A relative large device (falling height up to 2.85 m and impingement jet velocities between 5.3 and 7.6 m/s) has been used in the study. The behavior of the four types of free falling jets classified in previous studies has been analyzed in the time and the frequency domains. The study focuses on the pressure on the stagnation point. The pressure distributions near the stagnation point have been also analyzed. Finally, the results have been compared with the frequencies behavior for circular and rectangular jets available in the literature.