Analysis of valorization process of aluminum breakage scraps to obtain green hydrogen
In this article, it is proposed to use aluminum breakage scraps to obtain green hydrogen through the aluminum–water reaction with caustic soda as a catalyst with experimental research. From this exothermic reaction, both hydrogen and the heat generated can be used. Due to the low price of aluminum c...
| Autores: | , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2021 |
| País: | España |
| Recursos: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/343826 |
| Acesso em linha: | https://hdl.handle.net/2117/343826 https://dx.doi.org/10.3390/met11040598 |
| Access Level: | acceso abierto |
| Palavra-chave: | Aluminum Hydrogen Aluminum scraps Metal waste valorization Aluminum breakage scrap Green hydrogen Hydrogen-controlled generation Alumini Alumini -- Reciclatge Alumini -- Residus Hidrogen Àrees temàtiques de la UPC::Enginyeria dels materials |
| Resumo: | In this article, it is proposed to use aluminum breakage scraps to obtain green hydrogen through the aluminum–water reaction with caustic soda as a catalyst with experimental research. From this exothermic reaction, both hydrogen and the heat generated can be used. Due to the low price of aluminum chips, this allows us to produce green hydrogen below the current price that is obtained using renewable energy sources and electrolyzers. We have also developed a process that is sustainable since it is obtained as alumina and caustic soda waste that can be reused. This alumina obtained, once filtered, has high purity which allows us to produce high-quality primary aluminum without the need to use bauxite and the production of red sludge is also reduced. A comparative study-analysis was carried out between two of the forms in which the most common aluminum is presented in industry to analyze which one performs better by studying key factors such as the hydrogen produced, and the waste generated during the process. Finally, the mathematical model has been defined to be able to control the flow based on different key parameters such as temperature, molarity, and geometry. Undoubtedly, the study that we present represents a milestone for the recovery of metallic aluminum waste and may be of great interest to industries that use aluminum in their processes, such as recuperators, as well as the vehicle and aerospace industries |
|---|