Modulating the electron transporting properties of Subphthalocyanines for inverted perovskite solar cells
The lack of organic non-fullerene ETMs with good electron transport and device stability is an important problem for the further development and commercialization of perovskite solar cells. Herein, the use of SubPcs as ETMs in PSCs is explored. To this end, we analyze the influence of SubPc peripher...
| Autores: | , , , , , , |
|---|---|
| Tipo de documento: | artigo |
| Data de publicação: | 2022 |
| País: | España |
| Recursos: | Universidad Autónoma de Madrid |
| Repositório: | Biblos-e Archivo. Repositorio Institucional de la UAM |
| Idioma: | inglês |
| OAI Identifier: | oai:repositorio.uam.es:10486/705912 |
| Acesso em linha: | http://hdl.handle.net/10486/705912 https://dx.doi.org/10.3389/fchem.2022.886522 |
| Access Level: | Acceso aberto |
| Palavra-chave: | Perovskite solar cells Solar cell Formamidine Química |
| Resumo: | The lack of organic non-fullerene ETMs with good electron transport and device stability is an important problem for the further development and commercialization of perovskite solar cells. Herein, the use of SubPcs as ETMs in PSCs is explored. To this end, we analyze the influence of SubPc peripheral functionalization on the efficiency and stability of p-i-n PSCs. Specifically, ETMs based on three SubPcs (with either six or twelve peripheral fluorine and chlorine atoms) have been incorporated into PSCs with the perovskite layer deposited by solution processing (CsFAMAPbIBr). The device performance and morphology of these devices are deeply analyzed using several techniques, and the interfacial effects induced by the SubPcs are studied using photoluminescence and TR-PL. It is observed that the device stability is significantly improved upon insertion the SubPc layer. Moreover, the impact of the SubPc layer-thickness is assessed. Thus, a maximum power conversion efficiency of 13.6% was achieved with the champion device |
|---|