Fast Incoherent OFDR Interrogation of FBG Arrays Using Sparse Radio Frequency Responses

[EN] We present two implementations of fast, discrete incoherent optical frequency-domain reflectometers (I-OFDR) for the interrogation of equally spaced fiber Bragg grating (FBG) arrays, based on the determination of the array's radio frequency (RF) response at a sparse number of frequenci...

ver descrição completa

Detalhes bibliográficos
Autores: Clement, J., Hervás-Peralta, Javier, Maestre, H, Torregrosa, G., Fernandez-Pousa, Carlos R., Madrigal-Madrigal, Javier|||0000-0003-3156-1321, Sales Maicas, Salvador|||0000-0001-9457-976X
Formato: artículo
Fecha de publicación:2018
País:España
Recursos:Universitat Politècnica de València (UPV)
Repositorio:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:inglés
OAI Identifier:oai:riunet.upv.es:10251/147679
Acesso em linha:https://riunet.upv.es/handle/10251/147679
Access Level:acceso abierto
Palavra-chave:Fiber Bragg gratings
Incoherent OFDR
Microwave photonics
Optical fiber sensors
Sensor interrogation
TEORIA DE LA SEÑAL Y COMUNICACIONES
Descrição
Resumo:[EN] We present two implementations of fast, discrete incoherent optical frequency-domain reflectometers (I-OFDR) for the interrogation of equally spaced fiber Bragg grating (FBG) arrays, based on the determination of the array's radio frequency (RF) response at a sparse number of frequencies. FBG reflectivities are determined by use of the inverse discrete Fourier transform (IDFT) of the sparse RF response, in a dynamic range limited by crosstalk induced by FBG positioning errors. The first implementation employs the complete, vector RF response at a number of frequencies equal to the number N of FBGs in the array. In the second, the introduction of a reference reflector allows for an interrogation using the power (phaseless) RF response in 4N - 1 frequencies. Demodulation based on IDFT leads to total interrogation times determined by the network analyzer scan time, which can be as low as 10 mu s per FBG. Depending on the interrogation technique, electrical bandwidth requirements are 12 GHz in our array with 10-cm separation. We implemented both techniques in a N = 10 array, inducing decays in reflectivity by 10 dB in one or several FBGs. Unambiguous detection of FBG decays was obtained in both interrogation methods. Additional tests performed on the measured reflectivities also show that measurement linearity is preserved in the 10-dB decay range. As discrete I-OFDR systems, the proposed techniques show the possibility to reach compromises between interrogation time and dynamic range or accuracy in reflectivity measurements, using the number of interrogation frequencies and the sensor topology.