Tagasaste, leucaena and paulownia: three industrial crops for energy and hemicelluloses production

Background: Burning fast-growing trees for energy production can be an effective alternative to coal combustion. Thus, lignocellulosic material, which can be used to obtain chemicals with a high added value, is highly abundant, easily renewed and usually inexpensive. In this work, hemicellulose extr...

Descripción completa

Detalles Bibliográficos
Autores: Palma López, Alberto, Loaiza Rodríguez, Javier Mauricio, Díaz Blanco, Manuel Jesús, García Domínguez, Juan Carlos, Giráldez Díaz, Inmaculada, López Baldovín, Francisco
Tipo de recurso: artículo
Fecha de publicación:2021
País:España
Institución:Universidad de Huelva (UHU)
Repositorio:Arias Montano. Repositorio Institucional de la Universidad de Huelva
Idioma:inglés
OAI Identifier:oai:ariasmontano.uhu.es:10272/19862
Acceso en línea:http://hdl.handle.net/10272/19862
Access Level:acceso abierto
Palabra clave:Tagasaste
Leucaena
Paulownia
Biomass
Biomass combustion
Hemicellulose extraction
Descripción
Sumario:Background: Burning fast-growing trees for energy production can be an effective alternative to coal combustion. Thus, lignocellulosic material, which can be used to obtain chemicals with a high added value, is highly abundant, easily renewed and usually inexpensive. In this work, hemicellulose extraction by acid hydrolysis of plant biomass from three different crops (Chamaecytisus proliferus, Leucaena diversifolia and Paulownia trihybrid) was modelled and the resulting solid residues were used for energy production. Results: The influence of the nature of the lignocellulosic raw material and the operating conditions used to extract the hemicellulose fraction on the heat capacity and activation energy of the subsequent combustion process was examined. The heat power and the activation energy of the combustion process were found to depend markedly on the hemicellulose content of the raw material. Thus, a low content in hemicelluloses resulted in a lower increased energy yield after acid hydrolysis stage. The process was also influenced by the operating conditions of the acid hydrolysis treatment, which increased the gross calorific value (GCV) of the solid residue by 0.6–9.7% relative to the starting material. In addition, the activation energy of combustion of the acid hydrolysis residues from Chamaecytisus proliferus (Tagasaste) and Paulownia trihybrid (Paulownia) was considerably lower than that for the starting materials, the difference increasing with increasing degree of conversion as well as with increasing temperature and acid concentration in the acid hydrolysis. The activation energy of combustion of the solid residues from acid hydrolysis of tagasaste and paulownia decreased markedly with increasing degree of conversion, and also with increasing temperature and acid concentration in the acid hydrolysis treatment. No similar trend was observed in Leucaena diversifolia (Leucaena) owing to its low content in hemicelluloses. Conclusions: Acid hydrolysis of tagasaste, leucaena and paulownia provided a valorizable liquor containing a large amount of hemicelluloses and a solid residue with an increased heat power amenable to efficient valorization by combustion. There are many potential applications of the hemicelluloses-rich and lignin-rich fraction, for example as multi-components of bio-based feedstocks for 3D printing, for energy and other value-added chemicals.