Motion control in free-standing shape-memory actuators
In this work, free-standing shape-memory thermally triggered actuators are developed by laminating 'thiol-epoxy'-based glassy thermoset (GT) and stretched liquid-crystalline network (LCN) films. A sequential curing process was used to obtain GTs with tailored thermomechanical properties an...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/119817 |
| Acceso en línea: | https://hdl.handle.net/2117/119817 https://dx.doi.org/10.1088/1361-665X/aac278 |
| Access Level: | acceso abierto |
| Palabra clave: | Materials science Thermodynamics Thermoplastics Free-standing Shape-shifting Actuator Liquid-crystalline network Dual-curing Experimental study Ciència dels materials Termodinàmica Termoplàstics Àrees temàtiques de la UPC::Enginyeria dels materials Àrees temàtiques de la UPC::Enginyeria dels materials::Materials plàstics i polímers Àrees temàtiques de la UPC::Física::Termodinàmica |
| Sumario: | In this work, free-standing shape-memory thermally triggered actuators are developed by laminating 'thiol-epoxy'-based glassy thermoset (GT) and stretched liquid-crystalline network (LCN) films. A sequential curing process was used to obtain GTs with tailored thermomechanical properties and network relaxation dynamics, and also to assemble the final actuator. The actuation extent, rate and time were studied by varying the GT and the heating rate in thermo-actuation with an experimental approach. The results demonstrate that it is possible to tailor the actuation rate and time by designing GT materials with a glass transition temperature close to that of the liquid-crystalline-to-isotropic phase transition of the LCN, thus making it possible to couple the two processes. Such coupling is also possible in rapid heating processes even when the glass transition temperature of the GT is clearly lower than the isotropization temperature of the LCN, depending on the network relaxation dynamics of the GT and the presence of thermal gradients within the actuators. Interestingly, varying the GT network relaxation dynamics does not affect the actuation extent. As predicted by the analytical model developed in our previous work, the modulus of the GT layer is mainly responsible for the actuation extent. Finally, to demonstrate the enhanced control of the actuation, specifically designed actuators were assembled in a three-dimensional actuating device able to make complex motions (including 'S-type' bending). This approach makes it possible to engineer advanced functional materials for application in self-adaptable structures and soft robotics. |
|---|