Effect of Al2O3-NbC nanopowder incorporation on the mechanical properties of 3Y-TZP/Al2O3-NbC nanocomposites obtained by conventional and spark plasma sintering
[EN] The incorporation of Al2O3-NbC-nanopowder reinforcement in a 3Y-TZP matrix, and its influence on the mechanical properties of 3YTZP/Al2O3-NbC nanocomposites, obtained by conventional and spark plasma sintering (SPS), was investigated. Nanometric powders of Al2O3-NbC were prepared by reactive hi...
| Autores: | , , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/146176 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/146176 |
| Access Level: | acceso abierto |
| Palabra clave: | Sintering Composites Mechanical properties Al2O3-NbC Carbides ZrO2 CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA |
| Sumario: | [EN] The incorporation of Al2O3-NbC-nanopowder reinforcement in a 3Y-TZP matrix, and its influence on the mechanical properties of 3YTZP/Al2O3-NbC nanocomposites, obtained by conventional and spark plasma sintering (SPS), was investigated. Nanometric powders of Al2O3-NbC were prepared by reactive high-energy milling, deagglomeration, and leaching with acid, and added to the 3Y-TZP matrix, at a proportion of 5 vol%. The final powders were dried under airflow, compacted, and sintered in the temperature range of 1300-1500 degrees C. The effects of the sintering technique and final temperature, on the microstructure and mechanical properties, such as hardness, toughness, and Young's modulus, were analysed. Fracture toughness of the material reinforced with Al2O3-NbC nanopowders, which is one of its most important properties, differed significantly from that of the 3Y-TZP monolith (5.2 MPa m(1/2)). The nanocomposites, sintered conventionally at 1450 degrees C, showed higher fracture toughness (8.7 MPa m(1/2)). Microstructure observations indicated that NbC nanoparticles were dispersed homogeneously within the 3Y-TZP matrix, and limited its grain growth. However, partial oxidation of the NbC on the nanocomposite surface, at the conventional sintering temperature of 1500 degrees C, caused a reduction in the fracture toughness. |
|---|