Staübli work-cell: embedded controller
This technical report describes the design (both hardware and software) of an embedded controller for the Staüli work-cell available at the perception and manipulation laboratory at IRI. This system is based on a commercial embeeded computer (Beaglebone Black) and it is capable of managing all the w...
| Autor: | |
|---|---|
| Tipo de recurso: | informe técnico |
| Fecha de publicación: | 2015 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/80888 |
| Acceso en línea: | https://hdl.handle.net/2117/80888 |
| Access Level: | acceso abierto |
| Palabra clave: | manipulators multi-robot systems embedded computer Staübli work-cell Classificació INSPEC::Automation::Robots::Multi-robot systems Àrees temàtiques de la UPC::Informàtica::Robòtica |
| Sumario: | This technical report describes the design (both hardware and software) of an embedded controller for the Staüli work-cell available at the perception and manipulation laboratory at IRI. This system is based on a commercial embeeded computer (Beaglebone Black) and it is capable of managing all the work-cell devices. This include a custom planar XY robot, two simple grippers at the end effector of each Staübli robot, a six degrees of freedom force and torque sensor and optionally the two Staülbi robots themselves. This embedded system also monitors all the safety features integrated into the work-cell to provide updated information about the current state of the work-cell to all the device drivers and control programs. The safety featues available at the Staübli work cell include several emergency stop buttons, a laser curtain surrounding the perimeter of the work-cell and two mechanical fuses at the last joint of the Staübli robot. This document is intended as a complete reference manual of the embedded system, both from a software and a hardware points of view, for maintinance purposes and also to alow the addition of new features and upgrades in the future. |
|---|