Micromechanical investigations of CVD coated WC-Co cemented carbide by micropillar compression
Deformation behavior of an industrial coated cemented carbide (WC-Co substrate coated with CVD multilayer of TiN/Zr(C,N)/Ti(C,N,O)/Al2O3) was investigated by means of micropillar compression method. In addition to the WC-Co substrate pillars, new composite pillar combination consisting of substrate,...
| Autores: | , , , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2020 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/185697 |
| Acceso en línea: | https://hdl.handle.net/2117/185697 https://dx.doi.org/10.1016/j.matdes.2019.108283 |
| Access Level: | acceso abierto |
| Palabra clave: | Micromechanics Plasticity WC plasticity Cobalt deformation Zr(C N) (ZrCN) CVD hard coating TiN interlayer Interfacial strength EBSD Micromecànica Cobalt Plasticitat Àrees temàtiques de la UPC::Enginyeria dels materials |
| Sumario: | Deformation behavior of an industrial coated cemented carbide (WC-Co substrate coated with CVD multilayer of TiN/Zr(C,N)/Ti(C,N,O)/Al2O3) was investigated by means of micropillar compression method. In addition to the WC-Co substrate pillars, new composite pillar combination consisting of substrate, TiN interlayer and carbonitride hard coating were tested. The study targeted to document and analyze interactions between different phases and components (substrate, interlayer and coating) while subjected to compressive stress. It is found that deformation of the substrate depends mainly on the assemblage and the distribution of WC and Co phases within the pillar. The phase assemblage is subjected to changes after deformation which has an impact on the stiffness. Detailed analysis of plastic deformation within WC coarse grains pointed out that strain energy can be extensively dissipated in this phase by means of single and multiple slip. The composite/hybrid pillar formed by association of the substrate and the coating enhanced the ultimate strength in comparison to their respective individual components, highlighting the effective load-bearing response of coating and substrate acting as a coated system. This assessment was further supported by the excellent interfacial strength attested by the established TiN interlayer between the substrate and the coating. |
|---|