A 3-D Printed PCB Integrated TEM Horn Antenna
[EN] This paper presents a very broadband (5-40 GHz) novel three dimension (3-D) printed Transverse ElectroMagnetic (TEM) horn antenna. It is integrated with a planar Printed Circuit Board and radiates in a perpendicular direction of the Printed Circuit Board. The described antenna provides benefits...
| Autores: | , , , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2019 |
| País: | España |
| Recursos: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/156954 |
| Acesso em linha: | https://riunet.upv.es/handle/10251/156954 |
| Access Level: | acceso abierto |
| Palavra-chave: | Transition 3-D printed antenna TEM horn antenna Antenna array Broadband antenna TEORIA DE LA SEÑAL Y COMUNICACIONES |
| Resumo: | [EN] This paper presents a very broadband (5-40 GHz) novel three dimension (3-D) printed Transverse ElectroMagnetic (TEM) horn antenna. It is integrated with a planar Printed Circuit Board and radiates in a perpendicular direction of the Printed Circuit Board. The described antenna provides benefits in terms of cost and size for a two dimensional antenna array. Here the antenna and its corresponding transition to a regular 50 Omega microstrip line through Parallel Plate Waveguide and a 90 degrees bend are presented. Prototypes of back-to-back transitions and antenna are fabricated and measured. The antenna has a return loss below -10 dB and a gain of approximately 10 dBi over the targeted frequency range. |
|---|