Edge-Contact MoS2 Transistors Fabricated Using Thermal Scanning Probe Lithography
The science and engineering of two-dimensional materials (2DMs), in particular, of 2D semiconductors, is advancing at a thriving pace. It is well known that these delicate few-atoms thick materials can be damaged during the processing toward their integration into final devices. Thermal scanning pro...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Consejo Superior de Investigaciones Científicas (CSIC) |
| Repositorio: | DIGITAL.CSIC. Repositorio Institucional del CSIC |
| OAI Identifier: | oai:digital.csic.es:10261/283465 |
| Acceso en línea: | http://hdl.handle.net/10261/283465 https://api.elsevier.com/content/abstract/scopus_id/85138061685 |
| Access Level: | acceso abierto |
| Palabra clave: | 2D materials FET MoS2 TMDCs Edge contact Lithography Thermal scanning probe |
| Sumario: | The science and engineering of two-dimensional materials (2DMs), in particular, of 2D semiconductors, is advancing at a thriving pace. It is well known that these delicate few-atoms thick materials can be damaged during the processing toward their integration into final devices. Thermal scanning probe lithography (t-SPL) is a gentle alternative to the typically used electron beam lithography to fabricate these devices avoiding the use of electrons, which are well known to deteriorate the 2DMs' properties. Here, t-SPL is used for the fabrication of MoS2-based field effect transistors (FETs). In particular, the use of t-SPL is demonstrated for the first time for the fabrication of edge-contact MoS2 FETs, combining the hot-tip patterning and Ar+ milling to etch the 2DM. To avoid contamination of the contact interface by atmospheric gas molecules, etching and metal deposition are performed without breaking the vacuum conditions in between. With this process, edge-contact MoS2 FETs are successfully fabricated and characterized. On/off ratios up to 108 and 109 are obtained at room temperature in air and vacuum, respectively, i.e., comparable with the best values reported in the literature. |
|---|