Direction of crack propagation in a complete contact fretting-fatigue problem
In this work, the orientation and propagation of a crack in a fretting fatigue problem is analyzed numerically and correlated experimentally. The analysis is performed using a 2D model of a complete-contact fretting problem, consisting of two square indenters pressed onto a specimen subjected to cyc...
| Autores: | , , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2014 |
| País: | España |
| Recursos: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/56919 |
| Acesso em linha: | https://riunet.upv.es/handle/10251/56919 |
| Access Level: | acceso abierto |
| Palavra-chave: | Crack paths Crack propagation Fretting fatigue Complete contact Extended finite elements INGENIERIA MECANICA |
| Resumo: | In this work, the orientation and propagation of a crack in a fretting fatigue problem is analyzed numerically and correlated experimentally. The analysis is performed using a 2D model of a complete-contact fretting problem, consisting of two square indenters pressed onto a specimen subjected to cyclic fatigue. For the simulation, we use the extended finite element method (X-FEM), allowing for crack face contact during the corresponding parts of the fatigue cycle. The problem is highly non-linear and non-proportional and an orientation criterion is introduced to predict the crack direction in each step of the crack growth simulation. It is shown that the proposed criterion predicts crack orientation directions that are in good agreement with those found experimentally, in contrast to the directions found by application of conventional orientation criteria used in LEFM, such as the MTS criterion. |
|---|