Calcium and temperature effect on structural damage of hot air dried apple slices: Nonlinear irreversible thermodynamic approach and rehydration analysis

Mathematical models traditionally employed in fitting convective drying data do not use to report information about chemical and other physical changes different from the simple decrease in moisture content. In the present study, structural damage undergone by fresh and vacuum impregnated apple slic...

Descripción completa

Detalles Bibliográficos
Autores: Barrera Puigdollers, Cristina|||0000-0003-4408-3541, Betoret Valls, Noelia|||0000-0002-3326-8797, Betoret Valls, María Ester|||0000-0002-9814-5042, Fito Maupoey, Pedro
Tipo de recurso: artículo
Fecha de publicación:2016
País:España
Institución:Universitat Politècnica de València (UPV)
Repositorio:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:inglés
OAI Identifier:oai:riunet.upv.es:10251/78695
Acceso en línea:https://riunet.upv.es/handle/10251/78695
Access Level:acceso abierto
Palabra clave:Apple
Calcium
Vacuum impregnation
Hot air drying
Rehydration
Nonlinear irreversible thermodynamics
TECNOLOGIA DE ALIMENTOS
Descripción
Sumario:Mathematical models traditionally employed in fitting convective drying data do not use to report information about chemical and other physical changes different from the simple decrease in moisture content. In the present study, structural damage undergone by fresh and vacuum impregnated apple slices with different calcium lactate concentrations during convective drying at 30, 40 and 50 °C was analysed by applying equations derived from nonlinear irreversible thermodynamics to experimental data. According to the results obtained, vacuum impregnation with isotonic sucrose solution before drying at 30 °C provided maximum protection to cellular structure by promoting reversible deformations against irreversible breakages. On the contrary, cell walls strengthen with calcium had severe damaged during drying. Regarding air temperature, it was directly related both to the molar energy employed in deforming structures and the drying rate. These results were confirmed by analysing dried samples behaviour during further rehydration.