Frequency response of electrolyte-gated graphene electrodes and transistors

The interface between graphene and aqueous electrolytes is of high importance for applications of graphene in the field of biosensors and bioelectronics. The graphene/electrolyte interface is governed by the low density of states of graphene that limits the capacitance near the Dirac point in graphe...

Descripción completa

Detalles Bibliográficos
Autores: Drieschner, Simon|||0000-0002-4247-9617, Guimerà Brunet, Anton|||0000-0003-1768-3293, Garcia Cortadella, Ramon|||0000-0002-1506-6534, Viana, Damia|||0000-0001-8558-986X, Makrygiannis, Evangelos, Blaschke, Benno M., Vieten, Josua, Garrido, Jose|||0000-0001-5621-1067
Tipo de recurso: artículo
Fecha de publicación:2017
País:España
Institución:Universitat Autònoma de Barcelona
Repositorio:Dipòsit Digital de Documents de la UAB
Idioma:inglés
OAI Identifier:oai:ddd.uab.cat:189424
Acceso en línea:https://ddd.uab.cat/record/189424
https://dx.doi.org/urn:doi:10.1088/1361-6463/aa5443
Access Level:acceso abierto
Palabra clave:Graphene
Distributed elements
Impedance
Electrode
Transistor
Descripción
Sumario:The interface between graphene and aqueous electrolytes is of high importance for applications of graphene in the field of biosensors and bioelectronics. The graphene/electrolyte interface is governed by the low density of states of graphene that limits the capacitance near the Dirac point in graphene and the sheet resistance. While several reports have focused on studying the capacitance of graphene as a function of the gate voltage, the frequency response of graphene electrodes and electrolyte-gated transistors has not been discussed so far. Here, we report on the impedance characterization of single layer graphene electrodes and transistors, showing that due to the relatively high sheet resistance of graphene, the frequency response is governed by the distribution of resistive and capacitive circuit elements along the graphene/electrolyte interface. Based on an analytical solution for the impedance of the distributed circuit elements, we model the graphene/electrolyte interface both for the electrode and the transistor configurations. Using this model, we can extract the relevant material and device parameters such as the voltage-dependent intrinsic sheet and series resistances as well as the interfacial capacitance. The model also provides information about the frequency threshold of electrolyte-gated graphene transistors, above which the device exhibits a non-resistive response, offering an important insight into the suitable frequency range of operation of electrolyte-gated graphene devices.