High pressure roll crusher modelling
Using a previous mechanical characterization of two types of material, several lab-test work have been done. The data shows the particle size distribution of these tests, all the inputs and the model simulation presented in the related paper to this data base. The new mathematical approach use the o...
| Autor: | |
|---|---|
| Tipo de recurso: | conjunto de datos |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/168964 |
| Acceso en línea: | https://hdl.handle.net/2117/168964 https://dx.doi.org/10.5821/data-2117-168964-1 |
| Access Level: | acceso abierto |
| Palabra clave: | Milling, modelling, simulation, breakage Àrees temàtiques de la UPC::Enginyeria dels materials |
| Sumario: | Using a previous mechanical characterization of two types of material, several lab-test work have been done. The data shows the particle size distribution of these tests, all the inputs and the model simulation presented in the related paper to this data base. The new mathematical approach use the operative conditions and the feed particle size distribution to obtain a product, which is compared with the lab-test results |
|---|