Early detection of main bearing damage in wind turbines
According to the European Wind Energy Academy (EAWE), the wind industry has recognized that main bearing failures are a major concern in order to increase the reliability and availability of wind turbines. This is due to the high replacement cost of major repairs and the long downtime associated wit...
| Autores: | , , , |
|---|---|
| Tipo de documento: | artigo |
| Data de publicação: | 2022 |
| País: | España |
| Recursos: | Universitat Politècnica de Catalunya (UPC) |
| Repositório: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglês |
| OAI Identifier: | oai:upcommons.upc.edu:2117/374709 |
| Acesso em linha: | https://hdl.handle.net/2117/374709 https://dx.doi.org/10.24084/repqj20.430 |
| Access Level: | Acceso aberto |
| Palavra-chave: | Wind turbines Wind turbine Fault detection Main bearing SCADA data GRU neural networks Aerogeneradors Àrees temàtiques de la UPC::Matemàtiques i estadística::Matemàtica aplicada a les ciències Àrees temàtiques de la UPC::Energies::Energia eòlica::Aerogeneradors |
| Resumo: | According to the European Wind Energy Academy (EAWE), the wind industry has recognized that main bearing failures are a major concern in order to increase the reliability and availability of wind turbines. This is due to the high replacement cost of major repairs and the long downtime associated with main bearing failures. As a result, predicting main bearing failure has become an economically important problem as well as a technological difficulty. This paper presents a data-driven technique based on a closed recurrent unit (GRU) neural network for early failure prediction (months in advance). The main contributions of this work are: (i) The prediction is made exclusively using SCADA (Supervision Control and Data Acquisition) data already present in all industrial wind turbines. Therefore, there is no need to add additional sensors intended for a specific use. (ii) Since the proposed approach only requires healthy data, it can be used in any wind farm even if it has not recorded faulty data. (iii) The suggested algorithm operates under a variety of operational and environmental circumstances. (iv) The methodology is validated in two real inproduction wind turbines. production. |
|---|