Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study

[EN] Primary dental implant stability is critical to enable osseointegration. We assessed the primary stability of our newly designed dental implant. We used the calf rib bone animal model. Our implant has an outside tapered screw with two inside barrettes that deploy with a second screw situated at...

ver descrição completa

Detalhes bibliográficos
Autores: Lovera, Keila, Vanaclocha, Vicente, Vanaclocha, Amparo, Jorda-Gomez, Pablo, Saiz-Sapena, Nieves, Vanaclocha, Leyre, ATIENZA VICENTE, CARLOS MANUEL|||0000-0002-2522-2131
Formato: artículo
Fecha de publicación:2025
País:España
Recursos:Universitat Politècnica de València (UPV)
Repositorio:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:inglés
OAI Identifier:oai:riunet.upv.es:10251/219998
Acesso em linha:https://riunet.upv.es/handle/10251/219998
Access Level:acceso abierto
Palavra-chave:Bone-implant interactions
Osseointegration
Titanium implants
Porous implants
3D printing
id ES_7df2ffa1d66ec90cb0512d1b6491d0ab
oai_identifier_str oai:riunet.upv.es:10251/219998
network_acronym_str ES
network_name_str España
repository_id_str
spelling Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model StudyLovera, KeilaVanaclocha, VicenteVanaclocha, AmparoJorda-Gomez, PabloSaiz-Sapena, NievesVanaclocha, LeyreATIENZA VICENTE, CARLOS MANUEL|||0000-0002-2522-2131Bone-implant interactionsOsseointegrationTitanium implantsPorous implants3D printing[EN] Primary dental implant stability is critical to enable osseointegration. We assessed the primary stability of our newly designed dental implant. We used the calf rib bone animal model. Our implant has an outside tapered screw with two inside barrettes that deploy with a second screw situated at the implant's crown. We used ten calf ribs with III/IV bone density and inserted ten implants per rib. We deployed the barrettes in the calf rib's transversal direction to support against the nearby cortical bone. We measured the primary implant's stability with resonance frequency analysis and collected the Implant Stability Quota (ISQ) in the transverse and longitudinal calf rib planes before (PRE) and after (POS) deploying the barrette. The mean ISQ was PRE 84.00 +/- 3.56 and POS 84.73 +/- 4.53 (p = 0.84) in the longitudinal plane and PRE 81.80 +/- 2.74 and POS 83.53 +/- 4.53 (0.27) in the transverse plane. The barrettes' insertion increases our dental implant primary stability by 11% in the transverse plane and 2% in the longitudinal plane. Our dental implant ISQ values are in the higher range than those reported in the literature and reflect high primary stability after insertion. The barrette deployment improves the dental implant's primary stability, particularly in the direction in which it deploys (transverse plane).MDPI AGDepartamento de Ingeniería Mecánica y de MaterialesInstituto Universitario de Investigación Concertado de Ingeniería Mecánica y BiomecánicaEscuela Técnica Superior de Ingeniería IndustrialRepositorio Institucional de la Universitat Politècnica de València Riunet20252025-02-01journal articlehttp://purl.org/coar/resource_type/c_6501VoRhttp://purl.org/coar/version/c_970fb48d4fbd8a85info:eu-repo/semantics/articleapplication/pdfhttps://riunet.upv.es/handle/10251/219998reponame:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valénciainstname:Universitat Politècnica de València (UPV)Inglésengopen accesshttp://purl.org/coar/access_right/c_abf2Reconocimiento (by)http://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccessoai:riunet.upv.es:10251/2199982026-06-13T07:49:27Z
dc.title.none.fl_str_mv Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
title Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
spellingShingle Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
Lovera, Keila
Bone-implant interactions
Osseointegration
Titanium implants
Porous implants
3D printing
title_short Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
title_full Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
title_fullStr Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
title_full_unstemmed Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
title_sort Dental Implant with Porous Structure and Anchorage: Design and Bench Testing in a Calf Rib Model Study
dc.creator.none.fl_str_mv Lovera, Keila
Vanaclocha, Vicente
Vanaclocha, Amparo
Jorda-Gomez, Pablo
Saiz-Sapena, Nieves
Vanaclocha, Leyre
ATIENZA VICENTE, CARLOS MANUEL|||0000-0002-2522-2131
author Lovera, Keila
author_facet Lovera, Keila
Vanaclocha, Vicente
Vanaclocha, Amparo
Jorda-Gomez, Pablo
Saiz-Sapena, Nieves
Vanaclocha, Leyre
ATIENZA VICENTE, CARLOS MANUEL|||0000-0002-2522-2131
author_role author
author2 Vanaclocha, Vicente
Vanaclocha, Amparo
Jorda-Gomez, Pablo
Saiz-Sapena, Nieves
Vanaclocha, Leyre
ATIENZA VICENTE, CARLOS MANUEL|||0000-0002-2522-2131
author2_role author
author
author
author
author
author
dc.contributor.none.fl_str_mv Departamento de Ingeniería Mecánica y de Materiales
Instituto Universitario de Investigación Concertado de Ingeniería Mecánica y Biomecánica
Escuela Técnica Superior de Ingeniería Industrial
Repositorio Institucional de la Universitat Politècnica de València Riunet
dc.subject.none.fl_str_mv Bone-implant interactions
Osseointegration
Titanium implants
Porous implants
3D printing
topic Bone-implant interactions
Osseointegration
Titanium implants
Porous implants
3D printing
description [EN] Primary dental implant stability is critical to enable osseointegration. We assessed the primary stability of our newly designed dental implant. We used the calf rib bone animal model. Our implant has an outside tapered screw with two inside barrettes that deploy with a second screw situated at the implant's crown. We used ten calf ribs with III/IV bone density and inserted ten implants per rib. We deployed the barrettes in the calf rib's transversal direction to support against the nearby cortical bone. We measured the primary implant's stability with resonance frequency analysis and collected the Implant Stability Quota (ISQ) in the transverse and longitudinal calf rib planes before (PRE) and after (POS) deploying the barrette. The mean ISQ was PRE 84.00 +/- 3.56 and POS 84.73 +/- 4.53 (p = 0.84) in the longitudinal plane and PRE 81.80 +/- 2.74 and POS 83.53 +/- 4.53 (0.27) in the transverse plane. The barrettes' insertion increases our dental implant primary stability by 11% in the transverse plane and 2% in the longitudinal plane. Our dental implant ISQ values are in the higher range than those reported in the literature and reflect high primary stability after insertion. The barrette deployment improves the dental implant's primary stability, particularly in the direction in which it deploys (transverse plane).
publishDate 2025
dc.date.none.fl_str_mv 2025
2025-02-01
dc.type.none.fl_str_mv journal article
http://purl.org/coar/resource_type/c_6501
VoR
http://purl.org/coar/version/c_970fb48d4fbd8a85
dc.type.openaire.fl_str_mv info:eu-repo/semantics/article
format article
dc.identifier.none.fl_str_mv https://riunet.upv.es/handle/10251/219998
url https://riunet.upv.es/handle/10251/219998
dc.language.none.fl_str_mv Inglés
eng
language_invalid_str_mv Inglés
language eng
dc.rights.none.fl_str_mv open access
http://purl.org/coar/access_right/c_abf2
Reconocimiento (by)
http://creativecommons.org/licenses/by/4.0/
dc.rights.openaire.fl_str_mv info:eu-repo/semantics/openAccess
rights_invalid_str_mv open access
http://purl.org/coar/access_right/c_abf2
Reconocimiento (by)
http://creativecommons.org/licenses/by/4.0/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv MDPI AG
publisher.none.fl_str_mv MDPI AG
dc.source.none.fl_str_mv reponame:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
instname:Universitat Politècnica de València (UPV)
instname_str Universitat Politècnica de València (UPV)
reponame_str RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
collection RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
repository.name.fl_str_mv
repository.mail.fl_str_mv
_version_ 1869411701573550080
score 15.811543

Registos relacionados