Carbon nanotubes grown on stainless steel for supercapacitor applications
[eng] The ability of humans to study, manipulate and understand matter at the nanoscale has enabled us to develop materials that can combine physical, chemical, optical, magnetic and mechanical properties that bulk materials do not possess. One of the materials that triggered interest in the world o...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis doctoral |
| Estado: | Versión publicada |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Universidad de Barcelona |
| Repositorio: | Dipòsit Digital de la UB |
| OAI Identifier: | oai:diposit.ub.edu:2445/142730 |
| Acceso en línea: | https://hdl.handle.net/2445/142730 http://hdl.handle.net/10803/667708 |
| Access Level: | acceso abierto |
| Palabra clave: | Nanotubs Acer inoxidable Elèctrodes Nanotubes Stainless steel Electrodes |
| Sumario: | [eng] The ability of humans to study, manipulate and understand matter at the nanoscale has enabled us to develop materials that can combine physical, chemical, optical, magnetic and mechanical properties that bulk materials do not possess. One of the materials that triggered interest in the world of Nanoscience and Nanotechnology was carbon nanotubes (CNTs). These nanostructures had already been reported more than forty years ago, but it is not until the beginning of the 90s that Dr. Sumio Iijima manages to produce them under stable conditions in his laboratory. From that time onwards, the resources devoted to the research and production of these carbon-based materials were on the rise. Although today they do not capture the same scientific interest as they did until 2010, their importance in the scientific world and especially in the market is relevant. In fact, since the technology for the production of CNTs on an industrial scale has matured, they are found in an infinite number of applications, such as reinforcing polymers, acting as scaffolds for the growth of artificial tissue, in the manufacture of conductive inks or as part of new generation battery electrodes and supercapacitors. It is precisely in this last application that scientific interest has been focused with special attention. Together with other carbon-based materials, such as graphene, they are excellent support materials for materials with high capacitance. Research groups and companies around the world are spending a lot of resources to obtain electrodes that have a three-dimensional architecture at the nanoscale and whose specific surface is high. In that sense, the objective of this work was to synthesize CNTs on the surface of a flexible and conductive material: 304 stainless steel. We focused on optimizing the growth processes by plasma enhanced chemical vapor Deposition (PECVD) and water assisted chemical vapor deposition (WACVD) with and without the contribution of external catalyst material. In addition, as will be seen in the development of this work there is an important effort to understand the effects that thermal processes, necessary for CNTs growth, produced on the properties of steel. Especially the influence on corrosion resistance, since the final use of stainless steel CNTs is the manufacture of electrodes exposed to corrosive environments. |
|---|