Development of Coaxial Type flow microwave reactor
[EN] We have developed a flow microwave reactor with a coaxial cavity. It comprises a cylindrical cavity of 100 mm inside diameter, a metal rod along its center axis, and a spiral glass tube for flowing solvents and reactants, as shown in Fig.1. When the input port of microwave is placed at the end...
| Autores: | , , |
|---|---|
| Tipo de recurso: | capítulo de libro |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/130724 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/130724 |
| Access Level: | acceso abierto |
| Palabra clave: | Energy Production by Microwaves Microwave CVD EM Modelling Microwave Material interaction Dielectric Properties Dielectric Properties Measurement Solid State Microwave Microwave Processing Microwave Chemistry Microwave applicators design |
| Sumario: | [EN] We have developed a flow microwave reactor with a coaxial cavity. It comprises a cylindrical cavity of 100 mm inside diameter, a metal rod along its center axis, and a spiral glass tube for flowing solvents and reactants, as shown in Fig.1. When the input port of microwave is placed at the end of the metal rod, the TEM mode is excited in the cylindrical chamber due to the presence of the metal rod. Simulations of the electric field and the magnetic field within the coaxial cavity are shown in Fig.2. This configuration was confirmed suitable for rapid and continuous microwave syntheses of various functional metal complexes. Experimental results are presented of Ir(Ⅲ) complexes for OLED dopants and Ru(Ⅱ) complexes for various sensors. The application to rapid and continuous microwave synthesis of various functional metal complexes were performed in success. In the similar manner as the coaxial reaction chamber of 2.45GHz, a coaxial reaction chamber for 5.8GHz IMS band, dimension of 51mm in diameter and 50mm in height, is designed The electric field distributions in the chamber and the temperature profiles of solvent are simulated using the commercial simulator (COMSOL Multiphysics) for 5.8 GHz, 5W microwave input. Using the simulation results appropriate dimensions of the chamber are determined for the 5.8 GHz operation. When water is used as a solvent the simulation shows that the temperature rises from20℃ to 95℃ after 300 seconds of the microwave irradiation. |
|---|