Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)

[EN] Delamination is one of the main problems that occur when machining fiber-reinforced composite materials. In this work, Types I and II of delamination are studied separately in edge trimming of basalt fiber reinforced plastic (BFRP). For this purpose, one-dimensional and area delamination parame...

Descripción completa

Detalles Bibliográficos
Autores: Navarro-Mas, M.D.|||0000-0003-2022-8857, Meseguer, Maria-Desamparados|||0000-0003-0254-7993, Lluch-Cerezo, Joaquín|||0000-0003-1973-0188, García Manrique, Juan Antonio|||0000-0001-9507-0746
Tipo de recurso: artículo
Fecha de publicación:2020
País:España
Institución:Universitat Politècnica de València (UPV)
Repositorio:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Idioma:inglés
OAI Identifier:oai:riunet.upv.es:10251/170582
Acceso en línea:https://riunet.upv.es/handle/10251/170582
Access Level:acceso abierto
Palabra clave:Edge trimming
Delamination measurement
Basalt fiber reinforced plastic (BFRP)
INGENIERIA DE LOS PROCESOS DE FABRICACION
id ES_79f433dc5bbecfba706ccd49b7bef583
oai_identifier_str oai:riunet.upv.es:10251/170582
network_acronym_str ES
network_name_str España
repository_id_str
spelling Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)Navarro-Mas, M.D.|||0000-0003-2022-8857Meseguer, Maria-Desamparados|||0000-0003-0254-7993Lluch-Cerezo, Joaquín|||0000-0003-1973-0188García Manrique, Juan Antonio|||0000-0001-9507-0746Edge trimmingDelamination measurementBasalt fiber reinforced plastic (BFRP)INGENIERIA DE LOS PROCESOS DE FABRICACION[EN] Delamination is one of the main problems that occur when machining fiber-reinforced composite materials. In this work, Types I and II of delamination are studied separately in edge trimming of basalt fiber reinforced plastic (BFRP). For this purpose, one-dimensional and area delamination parameters are defined. One-dimensional parameters (Wa and Wb) allow to know average fibers length while the analysis of area delamination parameters (Sd) allow to evaluate delamination density. To study delamination, different tests are carried out modifying cutting parameters (cutting speed, feed per tooth and depth of cut) and material characteristics (fiber volume fraction and fiber orientation). Laminates with a lower fiber volume fraction do not present delamination. Attending to one-dimensional parameters it can be concluded that Type II delamination is more important than Type I and that a high depth of cut generates higher values of delamination parameters. An analysis of variance (ANOVA) is performed to study area parameters. Although delamination has a random nature, for each depth of cut, more influence variables in area delamination are firstly, feed per tooth and secondly, cutting speed.This research was funded by Government of Spain, grant number PID2019-108807RB-I00.MDPI AGEscuela Técnica Superior de Ingeniería Aeroespacial y Diseño IndustrialDepartamento de Ingeniería Mecánica y de MaterialesInstituto de Diseño para la Fabricación y Producción AutomatizadaEscuela Técnica Superior de Ingeniería IndustrialAGENCIA ESTATAL DE INVESTIGACIONRepositorio Institucional de la Universitat Politècnica de València Riunet20202020-12-01journal articlehttp://purl.org/coar/resource_type/c_6501VoRhttp://purl.org/coar/version/c_970fb48d4fbd8a85info:eu-repo/semantics/articleapplication/pdfhttps://riunet.upv.es/handle/10251/170582reponame:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valénciainstname:Universitat Politècnica de València (UPV)InglésengAgencia Estatal de Investigación http://dx.doi.org/10.13039/501100011033 Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-108807RB-I00 GEMELOS DIGITALES EN LOS PROCESOS DE FABRICACION ADITIVA PARA COMPONENTES DE FIBRA DE CARBONO: HACIA LA MOVILIDAD SOSTENIBLEopen accesshttp://purl.org/coar/access_right/c_abf2Reconocimiento (by)http://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccessoai:riunet.upv.es:10251/1705822026-06-13T07:49:27Z
dc.title.none.fl_str_mv Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
title Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
spellingShingle Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
Navarro-Mas, M.D.|||0000-0003-2022-8857
Edge trimming
Delamination measurement
Basalt fiber reinforced plastic (BFRP)
INGENIERIA DE LOS PROCESOS DE FABRICACION
title_short Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
title_full Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
title_fullStr Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
title_full_unstemmed Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
title_sort Comparison of Different Parameters to Evaluate Delamination in Edge Trimming of Basalt Fiber Reinforced Plastics (BFRP)
dc.creator.none.fl_str_mv Navarro-Mas, M.D.|||0000-0003-2022-8857
Meseguer, Maria-Desamparados|||0000-0003-0254-7993
Lluch-Cerezo, Joaquín|||0000-0003-1973-0188
García Manrique, Juan Antonio|||0000-0001-9507-0746
author Navarro-Mas, M.D.|||0000-0003-2022-8857
author_facet Navarro-Mas, M.D.|||0000-0003-2022-8857
Meseguer, Maria-Desamparados|||0000-0003-0254-7993
Lluch-Cerezo, Joaquín|||0000-0003-1973-0188
García Manrique, Juan Antonio|||0000-0001-9507-0746
author_role author
author2 Meseguer, Maria-Desamparados|||0000-0003-0254-7993
Lluch-Cerezo, Joaquín|||0000-0003-1973-0188
García Manrique, Juan Antonio|||0000-0001-9507-0746
author2_role author
author
author
dc.contributor.none.fl_str_mv Escuela Técnica Superior de Ingeniería Aeroespacial y Diseño Industrial
Departamento de Ingeniería Mecánica y de Materiales
Instituto de Diseño para la Fabricación y Producción Automatizada
Escuela Técnica Superior de Ingeniería Industrial
AGENCIA ESTATAL DE INVESTIGACION
Repositorio Institucional de la Universitat Politècnica de València Riunet
dc.subject.none.fl_str_mv Edge trimming
Delamination measurement
Basalt fiber reinforced plastic (BFRP)
INGENIERIA DE LOS PROCESOS DE FABRICACION
topic Edge trimming
Delamination measurement
Basalt fiber reinforced plastic (BFRP)
INGENIERIA DE LOS PROCESOS DE FABRICACION
description [EN] Delamination is one of the main problems that occur when machining fiber-reinforced composite materials. In this work, Types I and II of delamination are studied separately in edge trimming of basalt fiber reinforced plastic (BFRP). For this purpose, one-dimensional and area delamination parameters are defined. One-dimensional parameters (Wa and Wb) allow to know average fibers length while the analysis of area delamination parameters (Sd) allow to evaluate delamination density. To study delamination, different tests are carried out modifying cutting parameters (cutting speed, feed per tooth and depth of cut) and material characteristics (fiber volume fraction and fiber orientation). Laminates with a lower fiber volume fraction do not present delamination. Attending to one-dimensional parameters it can be concluded that Type II delamination is more important than Type I and that a high depth of cut generates higher values of delamination parameters. An analysis of variance (ANOVA) is performed to study area parameters. Although delamination has a random nature, for each depth of cut, more influence variables in area delamination are firstly, feed per tooth and secondly, cutting speed.
publishDate 2020
dc.date.none.fl_str_mv 2020
2020-12-01
dc.type.none.fl_str_mv journal article
http://purl.org/coar/resource_type/c_6501
VoR
http://purl.org/coar/version/c_970fb48d4fbd8a85
dc.type.openaire.fl_str_mv info:eu-repo/semantics/article
format article
dc.identifier.none.fl_str_mv https://riunet.upv.es/handle/10251/170582
url https://riunet.upv.es/handle/10251/170582
dc.language.none.fl_str_mv Inglés
eng
language_invalid_str_mv Inglés
language eng
dc.relation.none.fl_str_mv Agencia Estatal de Investigación http://dx.doi.org/10.13039/501100011033 Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-108807RB-I00 GEMELOS DIGITALES EN LOS PROCESOS DE FABRICACION ADITIVA PARA COMPONENTES DE FIBRA DE CARBONO: HACIA LA MOVILIDAD SOSTENIBLE
dc.rights.none.fl_str_mv open access
http://purl.org/coar/access_right/c_abf2
Reconocimiento (by)
http://creativecommons.org/licenses/by/4.0/
dc.rights.openaire.fl_str_mv info:eu-repo/semantics/openAccess
rights_invalid_str_mv open access
http://purl.org/coar/access_right/c_abf2
Reconocimiento (by)
http://creativecommons.org/licenses/by/4.0/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv MDPI AG
publisher.none.fl_str_mv MDPI AG
dc.source.none.fl_str_mv reponame:RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
instname:Universitat Politècnica de València (UPV)
instname_str Universitat Politècnica de València (UPV)
reponame_str RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
collection RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
repository.name.fl_str_mv
repository.mail.fl_str_mv
_version_ 1869411401321152512
score 15.300724

Similares en LA Referencia