Planning of electrical energy for the Galapagos Islands using different renewable energy technologies

The present study focuses on the planning of electrical energy for the Galapagos islands using different renewable energy technologies for the year 2031 in order to reduce diesel consumption and achieve 100% renewable energy share. To do that, a long-term load demand forecast study on the Santa Cruz...

ver descrição completa

Detalhes bibliográficos
Autores: Arévalo, Paul, Eras-Almeida, Andrea, Cano-Ortega, Antonio, Jurado-Melguizo, Francisco, Egido-Aguilera, Miguel Ángel
Tipo de documento: artigo
Estado:Versión aceptada para publicación
Data de publicação:2021
País:España
Recursos:Universidad de Jaén
Repositório:RUJA. Repositorio Institucional de la Producción Científica de la Universidad de Jaén
OAI Identifier:oai:ruja.ujaen.es:10953/6164
Acesso em linha:https://doi.org/10.1016/j.epsr.2021.107660
https://www.sciencedirect.com/science/article/pii/S0378779621006416?via%3Dihub
https://hdl.handle.net/10953/6164
Access Level:Acceso aberto
Palavra-chave:Galapagos Islands
Renewable energy
Pumped-storage
Desalinization
Hybrid power system
Neural network
621.35
Descrição
Resumo:The present study focuses on the planning of electrical energy for the Galapagos islands using different renewable energy technologies for the year 2031 in order to reduce diesel consumption and achieve 100% renewable energy share. To do that, a long-term load demand forecast study on the Santa Cruz and Baltra islands (Galapagos), applying Artificial Neural Networks, is done. Then, to optimize the islands’ power system, mostly based on diesel generation, different renewable energy technologies together with energy storage systems, such as batteries and hydraulic pumping, have been analyzed through the application of the HOMER Pro software. For this purpose, two energy control models have been developed to gradually reduce the operating hours of the diesel power plant. The results show that these islands can achieve 100% renewable penetration with the following configuration: photovoltaic/wind turbines/batteries/pumping hydroelectric storage system/diesel generators (only as back-up). This implies increasing the photovoltaic capacity by 26 MWp and installing a pumped hydraulic storage of 374 MWh. In this way, the electricity generation cost would be reduced from $ 0.32/kWh to $ 0.23/kWh, and the CO2 emissions would decrease by 16,000 tons of CO2 into the environment.