Optimizing biobased thermoset resins by incorporating cinnamon derivative into acrylated epoxidized soybean oil
[EN] The study successfully developed thermoset materials utilizing acrylate epoxidized soybean oil (AESO) and allyl cinnamate (ACIN) with tert-butyl peroxybenzoate (TBPB) as the initiator. Isothermal curing at temperatures between 110 °C to 140 °C of the developed formulations, showed that higher t...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2024 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/212560 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/212560 |
| Access Level: | acceso abierto |
| Palabra clave: | Thermoset Biobased AESO Allyl cinnamate Epoxy resin CIENCIA DE LOS MATERIALES E INGENIERIA METALURGICA 09.- Desarrollar infraestructuras resilientes, promover la industrialización inclusiva y sostenible, y fomentar la innovación 12.- Garantizar las pautas de consumo y de producción sostenibles 13.- Tomar medidas urgentes para combatir el cambio climático y sus efectos |
| Sumario: | [EN] The study successfully developed thermoset materials utilizing acrylate epoxidized soybean oil (AESO) and allyl cinnamate (ACIN) with tert-butyl peroxybenzoate (TBPB) as the initiator. Isothermal curing at temperatures between 110 °C to 140 °C of the developed formulations, showed that higher temperatures accelerated the conversion process. The higher curing temperature increased the degree of conversion, leading to obtain the best flexural strength for samples cured at 130 °C. However, samples cured at 120 °C exhibited better impact properties due to a lower degree of conversion, which allows for a more mobile reticular network. In addition, morphological observations confirmed these mechanical property trends. Dynamic thermal characterization revealed changes in glass transition temperature and exothermic reactions due to unreacted products appeared for materials cured at low temperature. Increasing curing temperature allowed to enhance thermal stability by increasing molecular weight. Finally, thermomechanical analysis confirmed stiffness and glass transition temperature increases observed during flexural tests and thermal characterization. |
|---|