Replication Data for: Detection of wind turbine rotor imbalance using unsupervised output-only vibration data analysis
This dataset supports research on rotor imbalance detection in wind turbines using output-only vibration data. It includes 65 experiments conducted on a laboratory-modified Enair E30Pro wind turbine (3 kW), adapted for indoor use. The turbine was modified to maintain the original moment of inertia a...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | conjunto de datos |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Consorci de Serveis Universitaris de Catalunya (CSUC) |
| Repositorio: | CORA.Repositori de Dades de Recerca |
| OAI Identifier: | oai:dnet:cora.rdr____::f569a4afabb398639b3154d43e33012a |
| Acceso en línea: | https://doi.org/10.34810/DATA2304 |
| Access Level: | acceso abierto |
| Palabra clave: | Engineering Wind turbines Aerogeneradors Condition monitoring Rotor imbalance Vibration Unsupervised learning Extended isolation forest |
| Sumario: | This dataset supports research on rotor imbalance detection in wind turbines using output-only vibration data. It includes 65 experiments conducted on a laboratory-modified Enair E30Pro wind turbine (3 kW), adapted for indoor use. The turbine was modified to maintain the original moment of inertia after resizing the blades and to allow for electrical operation and systematic data collection. Vibration data were collected using 8 triaxial accelerometers (PCB Piezotronics 356A17) placed on the turbine structure. This setup produced 24 measurement channels. Each experiment was recorded over 60 seconds at a sampling rate of 1706.66 Hz, resulting in a matrix with 102400 time points and 24 channels. Data are stored in individual .mat files, each containing one matrix per experiment. Of the 65 experiments, 45 correspond to healthy operating conditions and are divided into training, validation, and test subsets. The remaining 20 simulate rotor imbalance conditions across four severity levels by adding calibrated masses to the blades. The imbalance scenarios are as follows: Level 1: one blade with a 250 g mass, representing 12.5 percent of blade weight Level 2: one blade with a 500 g mass, representing 25 percent of blade weight Level 3: one blade with a 750 g mass, representing 37.5 percent of blade weight Level 4: two blades each with a 250 g mass (12.5 percent), one blade without added mass These configurations replicate realistic imbalance causes such as ice buildup or material wear. The dataset is well suited for time-series analysis, feature extraction, and the development of fault detection algorithms. |
|---|