CCD drift-scan imaging lunar occultations: a feasible approach for submeter class telescopes
A CCD drift-scanning technique for lunar occultation (LO) observations is presented. While this approach has been addressed before by Sturmann (\cite{laszlo94}) for the case of large telescopes, the technical validity has never been discussed for sub-meter class telescopes. In contrast to Sturmann&#...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2001 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:2445/207628 |
| Acceso en línea: | https://hdl.handle.net/2445/207628 |
| Access Level: | acceso abierto |
| Palabra clave: | Astrometria Estels binaris Ocultacions Astrometry Double stars Occultations |
| Sumario: | A CCD drift-scanning technique for lunar occultation (LO) observations is presented. While this approach has been addressed before by Sturmann (\cite{laszlo94}) for the case of large telescopes, the technical validity has never been discussed for sub-meter class telescopes. In contrast to Sturmann's scheme, the proposed technique places the CCD in the image plane of the telescope. This does not represent a problem in the case of small telescopes, where the practical angular resolution attainable by LO is not limited by aperture smoothing. Photon-generated charge is read out at millisecond rates on a column by column basis, as the diffraction pattern of the occulted star is being tracked. Two LO events (SAO 79031 and SAO 77911) were observed to demonstrate the feasibility of the method. Data analysis was carried out, yielding unresolved angular diameters for both objects. We show, however, that the technique could be useful for close binary detections with small telescopes. A discussion of the limiting resolution and magnitude imposed by our instrumentation is carried out, showing that the drift-scanning technique could be extended to 1-2 m telescopes for stellar diameter determination purposes. Finally, we point out that the technical demands required by this technique can be easily met by most small professional observatories and advanced amateurs. |
|---|