Application of configurational mechanics to crack propagation in quasi-brittle materials
The paper describes a numerical approach to represent cracking along non-pre-established directions, in 2-D structures or domains of quasi-brittle materials such as concrete or rock. The approach is developed on the basis of the FEM with zero-thickness interface elements, combined with the principle...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2021 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/335965 |
| Acceso en línea: | https://hdl.handle.net/2117/335965 https://dx.doi.org/10.1016/j.engfracmech.2020.107349 |
| Access Level: | acceso abierto |
| Palabra clave: | Brittleness--Mathematical models Configurational mechanics Crack propagation Non-pre-established crack paths Nodes relocation Finite Element Method Fragilitat -- Models matemàtics Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures Àrees temàtiques de la UPC::Matemàtiques i estadística::Anàlisi numèrica::Mètodes en elements finits |
| Sumario: | The paper describes a numerical approach to represent cracking along non-pre-established directions, in 2-D structures or domains of quasi-brittle materials such as concrete or rock. The approach is developed on the basis of the FEM with zero-thickness interface elements, combined with the principles of Configurational Mechanics. Interface elements are pre-inserted along all potential crack lines in the mesh, and are equipped with a plasticity-type fracture mechanics-based constitutive model that incorporates fracture energies in mode I and IIa as constitutive parameters. Once an interface element starts cracking, an iterative re-orientation process is triggered according to the direction of configurational forces. After that process has converged, the interface orientation becomes fixed and the surrounding nodes are relocated to preserve mesh quality. The overall procedure developed has the main advantages of a fixed mesh topology (constant number of nodes) and a crack re-orientation criterion based on the minimization of the overall structural energy, as implied by the definition of configurational forces. Various examples of application are presented in which cracks get re-oriented during calculations. The results show good agreement with the crack paths known by symmetry considerations or experimental results, thus illustrating the good performance of the approach proposed. |
|---|