Time-dependent behavior of NSM CFRP-strengthened RC beams under different service temperatures
The use of fiber reinforced polymer (FRP) for flexural strengthening of reinforced concrete (RC) beams has become a popular strengthening technique. Significant amount of work is available on the short-term flexural behavior of RC beams strengthened with near-surface mounted (NSM) technique. However...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:10256/21588 |
| Acceso en línea: | http://hdl.handle.net/10256/21588 |
| Access Level: | acceso abierto |
| Palabra clave: | Formigó armat Flexió (Mecànica) Resistència de materials Assaigs de materials Reinforced concrete Flexure Strength of materials Materials -- Testing Plàstics reforçats amb fibra Fiber-reinforced plastics |
| Sumario: | The use of fiber reinforced polymer (FRP) for flexural strengthening of reinforced concrete (RC) beams has become a popular strengthening technique. Significant amount of work is available on the short-term flexural behavior of RC beams strengthened with near-surface mounted (NSM) technique. However, their time-dependent flexural behavior, specifically under high service temperature, has not yet been addressed. This paper presents an experimental work to evaluate the time-dependent behavior of NSM carbon FRP (CFRP)-strengthened RC beams. The experimental program included 23 beams, where the effect of different parameters such as strengthening (CFRP) area, steel reinforcement ratio and applied temperature (20 and 50 °C) have been considered. Experimental results show that the effect of strengthening area is significant on the flexural short-term response of the beams, while minor effects are found on the time-dependent deflections. On the other hand, increasing the service temperature has no significant effect on the short-term tests, but it produces a large increase in the time-dependent deflection of the specimens. Finally, an analytical procedure for the prediction of time-dependent deflections, which is based on the age-adjusted effective modulus method (AEMM), is presented. Good agreement between the experimental results and analytical predictions on time-dependent deflections is shown |
|---|