Determination of mean intrinsic flexural strength and coupling factor of natural fiber reinforcement in polylactic acid biocomposites
This paper is focused on the flexural properties of bleached kraft softwood fibers, bio-based, biodegradable, and a globally available reinforcement commonly used in papermaking, of reinforced polylactic acid (PLA) composites. The matrix, polylactic acid, is also a bio-based and biodegradable polyme...
| Autores: | , , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/384541 |
| Acceso en línea: | https://hdl.handle.net/2117/384541 https://dx.doi.org/10.3390/polym11111736 |
| Access Level: | acceso abierto |
| Palabra clave: | PLA composites Bleached softwood fibers Bio-based materials Biodegradable materials Micromechanics Fibres naturals Àrees temàtiques de la UPC::Enginyeria dels materials |
| Sumario: | This paper is focused on the flexural properties of bleached kraft softwood fibers, bio-based, biodegradable, and a globally available reinforcement commonly used in papermaking, of reinforced polylactic acid (PLA) composites. The matrix, polylactic acid, is also a bio-based and biodegradable polymer. Flexural properties of composites incorporating percentages of reinforcement ranging from 15 to 30 wt % were measured and discussed. Another objective was to evaluate the strength of the interface between the matrix and the reinforcements, using the rule of mixtures to determine the coupling factor. Nonetheless, this rule of mixtures presents two unknowns, the coupling factor and the intrinsic flexural strength of the reinforcement. Hence, applying a ratio between the tensile and flexural intrinsic strengths and a defined fiber tensile and flexural strength factors, derived from the rule of mixtures is proposed. The literature lacks a precise evaluation of the intrinsic tensile strength of the reinforcements. In order to obtain such intrinsic tensile strength, we used the Kelly and Tyson modified equation as well as the solution provided by Bowyer and Bader. Finally, we were able to characterize the intrinsic flexural strengths of the fibers when used as reinforcement of polylactic acid. |
|---|