Organic-inorganic hybrid materials for boron removal from aqueous media
[EN] The present PhD thesis is centred in the design (using concepts of supramolecular chemistry), synthesis and characterization of different hybrid organic-inorganic materials for boron removal from aqueous media. The interaction between boron and organic groups, polyols, used in the development o...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis doctoral |
| Fecha de publicación: | 2016 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/63277 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/63277 |
| Access Level: | acceso abierto |
| Palabra clave: | Boron removal Hybrid Materials Low-cost materials, Ceramic Monoliths NMR 11B QUIMICA INORGANICA QUIMICA ORGANICA INGENIERIA DE LA CONSTRUCCION |
| Sumario: | [EN] The present PhD thesis is centred in the design (using concepts of supramolecular chemistry), synthesis and characterization of different hybrid organic-inorganic materials for boron removal from aqueous media. The interaction between boron and organic groups, polyols, used in the development of these new adsorbents is also studied. In the first part of the thesis it is presented a brief review of supramolecular chemistry concepts, chemistry of boron and also the main methods for boron removal (first chapter) and, also, the objectives of this thesis (second chapter). The third chapter exposes the results obtained by using a ceramic foam as macroscopic support for active materials for boron removal. This support is previously "impregnated" with an inorganic silica mesoporous material (UVM-7) and, in a second step, it is functionalized with an organic group with high boron affinity (gluconamide). This organic group, which works as an adsorbent, remains anchored to a macroscopic support, which will facilitate the use of these materials in industrial applications. Once the material is synthetized their boron adsorption and elimination abailability in aqueous media is studied and its ulterior reutilization. The fourth chapter of the PhD thesis is focused on the preparation of low cost materials for boron adsorption from water. In first place, it is used, as inorganic scaffolding, UVM-7 material, a mesoporous silica phase with a bimodal pore system. This material has a high boron adsorption capacity after its functionalization with the polyalcohol (as it is shown in the previous chapter) nevertheless, the reagents used in the synthesis tetraethylorthosilicate, as silica source, and hexadecyltrimethylammonium bromide, as templating agent are so expensive that they induce a high cost of final materials. In this chapter is presented as an alternative another materials which are able to perform as inorganic scaffolds: UVM-11 (surfactant-free mesoporous material), two silica xerogels with pores within the mesoporous range and comercial high surface area silica fume were prepared. Once all the materials are synthetized they are functionalized with gluconamides which are the active compounds for boron adsorption. Finally, a comparative study of the boron adsorption capacities in water is carried out. Low cost materials present comparable boron removal to those of higher cost and comercially abailable materials. Finally, in the fith chapter of this PhD thesis, the adsorption mechanism of boron on the active materials (based on UVM-7 as inorganic support) is studied using solid Nuclear Magnetic Resonance measures of 11B and 13C and using techniques as Magic Angle Sppining, crossed polarization and heteronuclear polarization disacoplament. To do that, a hybrid material composed by UVM-7 matrix grafted with gluconamide is prepared and then the solid is put in contact with different boron quantities. Final solids are characterized through 13C and 11B NMR, showing the formation of boronesters between gluconamide diol groups and boron adsorbed. When low boron concentration is used, bisquelate complexes are formed (B:glucosa = 1:2), however with higher concentrations monoquelate complexes are formed (B:glucosa = 1:1). This work was carried out in collaboration with the research group of "sol-gel materials and NMR", appertaining to the center of "Chimie de la matière condensée de Paris" of the "Université Pierre et Marie Curie". |
|---|