Artificial Intelligence for Quality Control of manufacturing operations: Macro-mechanical milling in the Pilot Line GAMHE 5.0
Quality is defined as the extent to which a product conforms to the design specifications and how it complies with the requirements of component functionality. For some industries, such as automotive and aeronautical, the quality of their parts is very important given the high requirements to which...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | conjunto de datos |
| Fecha de publicación: | 2021 |
| País: | España |
| Institución: | Consejo Superior de Investigaciones Científicas (CSIC) |
| Repositorio: | DIGITAL.CSIC. Repositorio Institucional del CSIC |
| OAI Identifier: | oai:digital.csic.es:10261/286591 |
| Acceso en línea: | http://hdl.handle.net/10261/286591 https://doi.org/10.20350/digitalCSIC/15084 |
| Access Level: | acceso abierto |
| Palabra clave: | Quality control Smart manufacturing Macro-mechanical milling Industry 4.0 |
| Sumario: | Quality is defined as the extent to which a product conforms to the design specifications and how it complies with the requirements of component functionality. For some industries, such as automotive and aeronautical, the quality of their parts is very important given the high requirements to which they are subject. However, difficulties arise from the fact that a measure of quality can only be evaluated ‘‘out-of-process”, resulting in losses because there is no alternative to removing defective parts from the production line. Therefore, it is necessary to apply Artificial Intelligence-based kits/solutions that provide in-process estimation to predict quality from some measured variables. The main goal of these datasets is to monitor the final quality of the manufactured components or parts by estimating surface roughness from vibration signals and cutting parameters information using Artificial Intelligence-based solutions. Surface roughness is an essential feature in quality control defined by the deviation in the direction of the normal vector of a real surface from its ideal form. Because the roughness measurement is an offline and post process procedure, being able to estimate this value online brings a series of benefits in terms of time and cost reduction in manufacturing lines, energy efficiency, unnecessary wear of tools and machines, etc. Once a part has been detected with a surface quality below what is desired, a series of corrective measures can be applied for the following operations, such as: reducing the feed rate percentage, increasing the percentage of spindle speed or reducing the axial depth per pass, etc. |
|---|