Graphene-based multimode interference device design for optical switching applications
The relatively small size and low energy consuming switching potential offered by graphene-based electro-optic and electro-absorption switches has attracted a lot of attention in the photonics community recently and there has been no research on integrating graphene on an MMI so far to my knowledge....
| Autor: | |
|---|---|
| Tipo de recurso: | tesis de maestría |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/127192 |
| Acceso en línea: | https://hdl.handle.net/2117/127192 |
| Access Level: | acceso abierto |
| Palabra clave: | Optical fibers Integrated optics Graphene MMI Fibres òptiques Òptica integrada Grafè Àrees temàtiques de la UPC::Enginyeria de la telecomunicació::Telecomunicació òptica::Fotònica |
| Sumario: | The relatively small size and low energy consuming switching potential offered by graphene-based electro-optic and electro-absorption switches has attracted a lot of attention in the photonics community recently and there has been no research on integrating graphene on an MMI so far to my knowledge. In this work, I theoretically model an integrated electro-optic switch based on a Multimode Interferometer (MMI) coated with graphene for data communication purposes. By varying a voltage over a range of 16V across a bi-layer of graphene, the proposed MMI can be used as a 1x2 switch with a graphene interaction length of around 140μm. As such, this component achieves a 0.22V cm efficiency at λ= 1550 nm, which is in line with efficiencies of similar components. The MMI on itself, has low energy consumption and is intrinsically a low-loss component and thus the idea of using this proposed switch on a large scale in data communication as a splitter is not excluded. |
|---|