Structural System Identification by mean of dynamic analysis
Mass and stiffness properties of real structures are different from those considered in design since simplified hypotheses are usually made and because the collaboration of non-structural elements and details are important. When structural problems are investigated (such as pathologies, serviceabili...
| Autor: | |
|---|---|
| Tipo de recurso: | tesis de maestría |
| Fecha de publicación: | 2010 |
| País: | España |
| Institución: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2099.1/12328 |
| Acceso en línea: | https://hdl.handle.net/2099.1/12328 |
| Access Level: | acceso abierto |
| Palabra clave: | Structural dynamics Structural analysis (Engineering) analysis structural Dinàmica estructural Estructures, Teoria de les Àrees temàtiques de la UPC::Enginyeria civil Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures |
| id |
ES_5f952dd12e7cc80d0c6fb412557ee85a |
|---|---|
| oai_identifier_str |
oai:upcommons.upc.edu:2099.1/12328 |
| network_acronym_str |
ES |
| network_name_str |
España |
| repository_id_str |
|
| spelling |
Structural System Identification by mean of dynamic analysisBeyer, FrankStructural dynamicsStructural analysis (Engineering)analysisstructuralDinàmica estructuralEstructures, Teoria de lesÀrees temàtiques de la UPC::Enginyeria civilÀrees temàtiques de la UPC::Enginyeria civil::Materials i estructuresMass and stiffness properties of real structures are different from those considered in design since simplified hypotheses are usually made and because the collaboration of non-structural elements and details are important. When structural problems are investigated (such as pathologies, serviceability and vibration comfort, etc.), knowledge of the actual response of the structure is needed with precision. Therefore, the source of the problem can be identified and solution in terms of reinforcement and possible retrofitting can be proposed. In this Master Thesis dynamic analysis and field data measurement is used in order to identify the parameters of complex structures. A real case study is considered, consisting in an office building with serviceability problems due to vibration. The structural system consists of steel frames; a bus ramp exists coupled to the building which introduces a dynamic excitation. The steel frames span over 17,23 metres without intermediate columns, which leads to low Eigenfrequencies. All frame nodes are clamped, a perimeter steel profile has clamped joints too. Between frames over the distance of 8,6 metres mixed beams are spanned, consisting of steel profile pinned to the frames and concrete slabs on a trapezoidal sheeting. Due to this concrete slabs the floors were assumed diaphragms in horizontal directions. A ramp is connected to the building. This ramp consists of longitudinal steel profiles carrying a trapezoidal sheeting as lost formwork with a concrete slab and an asphalt layer above. Those longitudinal profiles rest on transversal steel frames. The steel frames consist of a series of columns on one side and horizontal profiles which on the other side directly join the building frame´s column. Thus, whenever a vehicle excites the ramp, this vibration is transferred directly to the building, affecting serviceability and comfort. The objective of the research is to investigate the actual behaviour of the building and the possible imperfect connections. After the system is identified, possible actions are investigated in order to improve the service behaviour and comfort. In order to achieve this aim, dynamic traffic loads are simulated by a series of time history functions. Bus passes are simulated and measured under different velocities. As a result the ramp´s Eigenfrequency is 11,1 Hz, and acts as excitation frequency on the building. Especially on the first frame, which has different vibration modes than the others, this excitation frequency matches with a horizontal frame Eigenfrequency, leading to notable accelerations on the floors.Universitat Politècnica de CatalunyaBairán García, Jesús MiguelAlegre Heitzmann, Vicente20102010-05-0320112011-06-23master thesishttp://purl.org/coar/resource_type/c_bdccNAhttp://purl.org/coar/version/c_be7fb7dd8ff6fe43info:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfapplication/pdfhttps://hdl.handle.net/2099.1/12328reponame:UPCommons. Portal del coneixement obert de la UPCinstname:Universitat Politècnica de Catalunya (UPC)Inglésengopen accesshttp://purl.org/coar/access_right/c_abf2Attribution-NonCommercial-NoDerivs 3.0 Spainhttp://creativecommons.org/licenses/by-nc-nd/3.0/es/info:eu-repo/semantics/openAccessoai:upcommons.upc.edu:2099.1/123282026-05-27T15:37:01Z |
| dc.title.none.fl_str_mv |
Structural System Identification by mean of dynamic analysis |
| title |
Structural System Identification by mean of dynamic analysis |
| spellingShingle |
Structural System Identification by mean of dynamic analysis Beyer, Frank Structural dynamics Structural analysis (Engineering) analysis structural Dinàmica estructural Estructures, Teoria de les Àrees temàtiques de la UPC::Enginyeria civil Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures |
| title_short |
Structural System Identification by mean of dynamic analysis |
| title_full |
Structural System Identification by mean of dynamic analysis |
| title_fullStr |
Structural System Identification by mean of dynamic analysis |
| title_full_unstemmed |
Structural System Identification by mean of dynamic analysis |
| title_sort |
Structural System Identification by mean of dynamic analysis |
| dc.creator.none.fl_str_mv |
Beyer, Frank |
| author |
Beyer, Frank |
| author_facet |
Beyer, Frank |
| author_role |
author |
| dc.contributor.none.fl_str_mv |
Bairán García, Jesús Miguel Alegre Heitzmann, Vicente |
| dc.subject.none.fl_str_mv |
Structural dynamics Structural analysis (Engineering) analysis structural Dinàmica estructural Estructures, Teoria de les Àrees temàtiques de la UPC::Enginyeria civil Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures |
| topic |
Structural dynamics Structural analysis (Engineering) analysis structural Dinàmica estructural Estructures, Teoria de les Àrees temàtiques de la UPC::Enginyeria civil Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures |
| description |
Mass and stiffness properties of real structures are different from those considered in design since simplified hypotheses are usually made and because the collaboration of non-structural elements and details are important. When structural problems are investigated (such as pathologies, serviceability and vibration comfort, etc.), knowledge of the actual response of the structure is needed with precision. Therefore, the source of the problem can be identified and solution in terms of reinforcement and possible retrofitting can be proposed. In this Master Thesis dynamic analysis and field data measurement is used in order to identify the parameters of complex structures. A real case study is considered, consisting in an office building with serviceability problems due to vibration. The structural system consists of steel frames; a bus ramp exists coupled to the building which introduces a dynamic excitation. The steel frames span over 17,23 metres without intermediate columns, which leads to low Eigenfrequencies. All frame nodes are clamped, a perimeter steel profile has clamped joints too. Between frames over the distance of 8,6 metres mixed beams are spanned, consisting of steel profile pinned to the frames and concrete slabs on a trapezoidal sheeting. Due to this concrete slabs the floors were assumed diaphragms in horizontal directions. A ramp is connected to the building. This ramp consists of longitudinal steel profiles carrying a trapezoidal sheeting as lost formwork with a concrete slab and an asphalt layer above. Those longitudinal profiles rest on transversal steel frames. The steel frames consist of a series of columns on one side and horizontal profiles which on the other side directly join the building frame´s column. Thus, whenever a vehicle excites the ramp, this vibration is transferred directly to the building, affecting serviceability and comfort. The objective of the research is to investigate the actual behaviour of the building and the possible imperfect connections. After the system is identified, possible actions are investigated in order to improve the service behaviour and comfort. In order to achieve this aim, dynamic traffic loads are simulated by a series of time history functions. Bus passes are simulated and measured under different velocities. As a result the ramp´s Eigenfrequency is 11,1 Hz, and acts as excitation frequency on the building. Especially on the first frame, which has different vibration modes than the others, this excitation frequency matches with a horizontal frame Eigenfrequency, leading to notable accelerations on the floors. |
| publishDate |
2010 |
| dc.date.none.fl_str_mv |
2010 2010-05-03 2011 2011-06-23 |
| dc.type.none.fl_str_mv |
master thesis http://purl.org/coar/resource_type/c_bdcc NA http://purl.org/coar/version/c_be7fb7dd8ff6fe43 |
| dc.type.openaire.fl_str_mv |
info:eu-repo/semantics/masterThesis |
| format |
masterThesis |
| dc.identifier.none.fl_str_mv |
https://hdl.handle.net/2099.1/12328 |
| url |
https://hdl.handle.net/2099.1/12328 |
| dc.language.none.fl_str_mv |
Inglés eng |
| language_invalid_str_mv |
Inglés |
| language |
eng |
| dc.rights.none.fl_str_mv |
open access http://purl.org/coar/access_right/c_abf2 Attribution-NonCommercial-NoDerivs 3.0 Spain http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
| dc.rights.openaire.fl_str_mv |
info:eu-repo/semantics/openAccess |
| rights_invalid_str_mv |
open access http://purl.org/coar/access_right/c_abf2 Attribution-NonCommercial-NoDerivs 3.0 Spain http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf application/pdf |
| dc.publisher.none.fl_str_mv |
Universitat Politècnica de Catalunya |
| publisher.none.fl_str_mv |
Universitat Politècnica de Catalunya |
| dc.source.none.fl_str_mv |
reponame:UPCommons. Portal del coneixement obert de la UPC instname:Universitat Politècnica de Catalunya (UPC) |
| instname_str |
Universitat Politècnica de Catalunya (UPC) |
| reponame_str |
UPCommons. Portal del coneixement obert de la UPC |
| collection |
UPCommons. Portal del coneixement obert de la UPC |
| repository.name.fl_str_mv |
|
| repository.mail.fl_str_mv |
|
| _version_ |
1869409218005565440 |
| score |
15,300719 |