Zein as a Basis of Recyclable Injection Moulded Materials. Effect of Formulation and Processing Conditions
The growing concern about reducing carbon footprint has led to the progressive replacement of traditional polymeric materials by natural-based biodegradable materials. However, materials from natural sources (i.e., plants) typically possess poorer mechanical properties when compared to conventional...
| Autores: | , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2023 |
| País: | España |
| Institución: | Universidad de Sevilla (US) |
| Repositorio: | idUS. Depósito de Investigación de la Universidad de Sevilla |
| OAI Identifier: | oai:idus.us.es:11441/159801 |
| Acceso en línea: | https://hdl.handle.net/11441/159801 https://doi.org/10.3390/polym15183841 |
| Access Level: | acceso abierto |
| Palabra clave: | Bioplastic Injection moulding Rheology Tensile properties Zein |
| Sumario: | The growing concern about reducing carbon footprint has led to the progressive replacement of traditional polymeric materials by natural-based biodegradable materials. However, materials from natural sources (i.e., plants) typically possess poorer mechanical properties when compared to conventional plastics. To counterbalance this, they need to be adequately formulated and processed to eventually meet the standards for certain applications. Zein is the major storage protein from corn and can be obtained as a by-product from the corn-oil industry. It is an excellent candidate for producing green materials due to its stability, biodegradability, renewability, and suitable mechanical and technical-functional properties. In the present work, zein was blended with a plasticizer (i.e., glycerol) at three different zein/glycerol ratios (75/25, 70/30, and 65/25) and then injection moulded at three different processing temperatures (120, 150, and 190 °C). The properties of both blends and bioplastics were evaluated using dynamic mechanical analysis (DMA), tensile tests, and water absorption capacity (WUC). The properties–structure interrelation was assessed through a scanning electron microscope. Generally, a higher zein content and processing temperature led to a certain reinforcement of the samples. Moreover, all bioplastics displayed a thermoplastic behaviour finally melting at temperatures around 80 °C. The lack of massive crosslinking enabled this melting, which finally could be used to confirm the ability of zein based materials to be recycled, while maintaining their properties. The recyclability of thermoplastic zein materials widens the scope of their application, especially considering its biodegradability. |
|---|