Comparison of design for composite columns in steel and concrete according to Eurocode 4 and Chinese design codes
[EN] This paper compares the design of composite columns in steel and concrete based on EN1994-1-1 and Chinese JGJ138-2016. First, the application ranges of the codes are pointed out. Both codes contain the design of fully encased composite sections and concrete filled rectangular and circular tubes...
| Autores: | , |
|---|---|
| Tipo de recurso: | capítulo de libro |
| Fecha de publicación: | 2018 |
| País: | España |
| Institución: | Universitat Politècnica de València (UPV) |
| Repositorio: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia |
| Idioma: | inglés |
| OAI Identifier: | oai:riunet.upv.es:10251/108891 |
| Acceso en línea: | https://riunet.upv.es/handle/10251/108891 |
| Access Level: | acceso abierto |
| Palabra clave: | Composite column Eurocode 4 JGJ138-2016 |
| Sumario: | [EN] This paper compares the design of composite columns in steel and concrete based on EN1994-1-1 and Chinese JGJ138-2016. First, the application ranges of the codes are pointed out. Both codes contain the design of fully encased composite sections and concrete filled rectangular and circular tubes. However, there are different limitations on cross-section sizes, material strength classes, and others. JGJ138 has three separate chapters for the designs related to the three different types of columns. Eurocode 4 gives three different design methods: one general method based on nonlinear calculation, and two simplified methods based on European buckling curves or N-M iteration curves. For the materials, mechanical properties, such as design strength values, are compared based on the same material grade. For axial compression resistance and eccentrically compressive resistance, the two simplified methods from Eurocode 4 are compared with the design method according to JGJ138-2016 through theoretical and parameter studies. The influences of related parameters such as long-term effects, the buckling curves, and N-M iteration curves are also compared. For shear design, JGJ138-2016 considers mainly transverse shear resistances, while Eurocode 4 further considers shear connection and load introduction. The design transverse shear resistance is compared through theory. |
|---|