In-field one-step measurement of dissolved chemical oxygen demand with an integrated screen-printed electrochemical sensor
The increasing awareness of the importance of water for human and environmental health has prompted the need for developing fast, user-friendly and cost-effective analytical approaches for quality control and management. This work reports the fabrication and analytical assessment of a very simple sa...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2022 |
| País: | España |
| Institución: | Consejo Superior de Investigaciones Científicas (CSIC) |
| Repositorio: | DIGITAL.CSIC. Repositorio Institucional del CSIC |
| OAI Identifier: | oai:digital.csic.es:10261/283541 |
| Acceso en línea: | http://hdl.handle.net/10261/283541 https://api.elsevier.com/content/abstract/scopus_id/85133564373 |
| Access Level: | acceso abierto |
| Palabra clave: | Chemical oxygen demand Electrochemical sensor On-site analysis One-step measurement Screen-printing |
| Sumario: | The increasing awareness of the importance of water for human and environmental health has prompted the need for developing fast, user-friendly and cost-effective analytical approaches for quality control and management. This work reports the fabrication and analytical assessment of a very simple sample-to-result electrochemical sensor for discrete and precise measurements of dissolved chemical oxygen demand (COD) in water samples of urban wastewater treatment plants (UWWTP). The device is fabricated by screen printing and shows a three-electrode cell configuration including a working electrode made of a composite material comprising a porous carbon matrix and copper nanoparticles, synthesized by a customized one-pot sol-gel process. The key feature of this device is the implementation of a paper disk loaded with sodium hydroxide covering the electrochemical cell area that allows sample filtering and pH conditioning. Thus, analytical measurements are carried out by casting a 20 µL sample drop without requiring any further user intervention. The overall sensor fabrication process can be scaled up for cost-effective mass manufacturing. The feasibility and performance of this integrated device are first evaluated using glucose as a standard analyte. A linear range up to 400 mg L− 1 O2 and a limit of detection of around 26 mg L− 1 O2 is achieved, this being well below the EU legal concentration limit of 125 mg L− 1 set for effluents of UWWTPs. Three real samples are analyzed in the lab as well as on-site and COD sensor values are in agreement with those obtained with the standard dichromate method at a certified laboratory, within the error limits. This miniaturized novel sensor platform greatly simplifies the standard analytical procedure for measuring COD, facilitating rapid decentralized analysis for precise control of urban wastewater treatment. |
|---|