Slotted Circularly Polarized Microstrip Antenna for RFID Application
A single layer coaxial fed rectangular microstrip slotted antenna for circular polarization (CP) is proposed for radio frequency identification (RFID) application. Two triangular shaped slots and one rectangular slot along the diagonal axis of a square patch have been embedded. Due to slotted struct...
| Autores: | , , , , |
|---|---|
| Formato: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2016 |
| País: | España |
| Recursos: | Universitat Ramon Llull (URL) |
| Repositorio: | DAU Arxiu Digital de la Universitat Ramon Llull |
| OAI Identifier: | oai:dau.url.edu:20.500.14342/3357 |
| Acesso em linha: | http://hdl.handle.net/20.500.14342/3357 http://doi.org/10.13164/re.2017.1025 |
| Access Level: | acceso abierto |
| Palavra-chave: | Ràdio -- Antenes Antenes (Electrònica) 62 |
| Resumo: | A single layer coaxial fed rectangular microstrip slotted antenna for circular polarization (CP) is proposed for radio frequency identification (RFID) application. Two triangular shaped slots and one rectangular slot along the diagonal axis of a square patch have been embedded. Due to slotted structure along the diagonal axis and less surface area, good quality of circular polarization has been obtained with the reduction in the size of microstrip antenna by 4.04 %. Circular polarization radiation performance has been studied by size and angle variation of diagonally slotted structures. The experimental result found for 10-dB return loss is 44 MHz with 10MHz of 3dB Axial Ratio (AR) bandwidth respectively at the resonant frequency 910 MHz. The overall proposed antenna size including the ground plane is 80 mm x 80 mm x 4.572 mm. |
|---|