BER degradation detection and failure identification in elastic optical networks
IEEE Optical connections support virtual links in MPLS-over-optical multilayer networks and therefore, errors in the optical layer impact on the quality of the services deployed on such networks. Monitoring the performance of the physical layer allows verifying the proper working of optical connecti...
| Autores: | , , , , , , , , |
|---|---|
| Formato: | artículo |
| Fecha de publicación: | 2017 |
| País: | España |
| Recursos: | Universitat Politècnica de Catalunya (UPC) |
| Repositorio: | UPCommons. Portal del coneixement obert de la UPC |
| Idioma: | inglés |
| OAI Identifier: | oai:upcommons.upc.edu:2117/107772 |
| Acesso em linha: | https://hdl.handle.net/2117/107772 https://dx.doi.org/10.1109/JLT.2017.2747223 |
| Access Level: | acceso abierto |
| Palavra-chave: | Optical communications BER degradation detection Elastic optical networks Failure identification Comunicacions òptiques Àrees temàtiques de la UPC::Enginyeria de la telecomunicació::Telecomunicació òptica |
| Resumo: | IEEE Optical connections support virtual links in MPLS-over-optical multilayer networks and therefore, errors in the optical layer impact on the quality of the services deployed on such networks. Monitoring the performance of the physical layer allows verifying the proper working of optical connections, as well as to detect bit error rate (BER) degradation and anticipate connection disruption. In addition, failure identification facilitates localizing the cause of the failure by providing a short list of potential failed elements and enables self-decision making to keep committed service level. In this paper, we analyze several failure causes affecting the quality of optical connections and propose two different algorithms: one focused on detecting significant BER changes in optical connections, named as BANDO, and the other focused on identify the most probable failure pattern, named as LUCIDA. BANDO runs inside the network nodes to accelerate degradation detection and sends a notification to the LUCIDA algorithm running on the centralized controller. Experimental measures were carried out on two different setups to obtain values for BER and received power and used to generate synthetic data used in subsequent simulations. Results show significant improvement anticipating maximum BER violation with small failure identification errors. |
|---|