A detailed energy analysis of a novel evaporator with latent thermal energy storage ability
The direct integration of phase change materials (PCM) into refrigeration and air conditioning systems through compact modules is an identified literature gap. In response to the literature gap, this paper provides a detailed energy analysis of a novel compact thermal energy storage module, that all...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2021 |
| País: | España |
| Institución: | Varias* (Consorci de Biblioteques Universitáries de Catalunya, Centre de Serveis Científics i Acadèmics de Catalunya) |
| Repositorio: | Recercat. Dipósit de la Recerca de Catalunya |
| OAI Identifier: | oai:recercat.cat:10459.1/72468 |
| Acceso en línea: | https://doi.org/10.1016/j.applthermaleng.2021.117844 http://hdl.handle.net/10459.1/72468 |
| Access Level: | acceso abierto |
| Palabra clave: | Energy analysis Thermal energy storage (TES) Phase change materials (PCMs) Heat exchange Experimental study |
| Sumario: | The direct integration of phase change materials (PCM) into refrigeration and air conditioning systems through compact modules is an identified literature gap. In response to the literature gap, this paper provides a detailed energy analysis of a novel compact thermal energy storage module, that allows its direct integration into a refrigeration system as the evaporator. The study addresses key aspects of thermal energy storage (TES) and heat transfer mechanism that complement the previous analyses of the novel concept. Here the total energy stored in the module (including in all auxiliary parts), the charging/discharging power, and the behaviour of the module when used as a TES module and as a heat exchanger (HEX) are assessed. The results demonstrate the feasibility of the module to work as a TES and as a HEX. When working as a TES, complete charging and discharging was achieved, and 54% of the total energy was stored in the PCM although the PCM only accounts for around 14% of the total mass. Moreover, the highest charging/discharging power was obtained within the temperature range where most of the phase change occurred. When the module works as a HEX, it initially charges/discharges partially until a thermal equilibrium is achieved and the level of charge responds to the variation in the energy supply and demand. |
|---|