Analysis of the viability of prefabricated elements for partitions manufactured with plaster and eps from waste recycling
The objective of this paper is to study the viability of the use of gypsum with expanded poliestirene (EPS) from recycling to manufacture elements for the construction of interior partitions. This paper presents several proposals blocks for inner partitions made with gypsum and EPS from construction...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Consejo General de la Arquitectura Técnica de España (CGATE) |
| Repositorio: | RIARTE |
| OAI Identifier: | oai:www.riarte.es:20.500.12251/1590 |
| Acceso en línea: | http://hdl.handle.net/20.500.12251/1590 http://dx.doi.org/10.6036/8984 |
| Access Level: | acceso abierto |
| Palabra clave: | Yeso Poliestireno expandido (EPS) Reciclaje - Construcción Tabiquería Residuos de Construcción Demolición (RCD) Resistencia mecánica Ensayos (propiedades o materiales) 3313.04 Material de Construcción 2304.20 Poliestireno 3312.08 Propiedades de Los Materiales 3312.12 Ensayo de Materiales 2211.02 Materiales Compuestos 3308.02 Residuos Industriales |
| Sumario: | The objective of this paper is to study the viability of the use of gypsum with expanded poliestirene (EPS) from recycling to manufacture elements for the construction of interior partitions. This paper presents several proposals blocks for inner partitions made with gypsum and EPS from construction and demolition waste, as well as summarizing the results obtained in the different tests carried out to verify their mechanical behavior and in this way compare them with similar construction elements that are currently commercialized. In this work, carried out under the Waste to Resources (W2R) project, different block solutions are studied, all based on a sandwich panel system, in which the outer faces of the block are formed by a 6 mm thick gypsum board, enclosing a core formed with a low density material, and therefore, high deformability. © 2019 Publicaciones Dyna Sl. All rights reserved. |
|---|