Liquid-phase synthesis of butyl levulinate with simultaneous water removal catalyzed by ion exchange resins
The liquid-phase synthesis of butyl levulinate by esterification of levulinic with an excess of 1-butanol (initial molar ratio 1:3) and simultaneous water removal has been studied at atmospheric pressure and at the boiling point of the reacting medium. The catalytic performance of ten commercial sul...
| Autores: | , , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión aceptada para publicación |
| Fecha de publicación: | 2019 |
| País: | España |
| Institución: | Universidad de Barcelona |
| Repositorio: | Dipòsit Digital de la UB |
| OAI Identifier: | oai:diposit.ub.edu:2445/137297 |
| Acceso en línea: | https://hdl.handle.net/2445/137297 |
| Access Level: | acceso abierto |
| Palabra clave: | Alcohol butílic Catàlisi Resines de bescanvi iònic Butanol Catalysis Ion exchange resins |
| Sumario: | The liquid-phase synthesis of butyl levulinate by esterification of levulinic with an excess of 1-butanol (initial molar ratio 1:3) and simultaneous water removal has been studied at atmospheric pressure and at the boiling point of the reacting medium. The catalytic performance of ten commercial sulfonic resins has been compared: four gel-type and six macroreticular. For both type of resins the levulinic acid conversion was complete after 4-6h and no byproducts derived from the acid were detected. Selectivity of 1-butanol towards the ester was about 95%, di-butyl ether and butenes being the detected 1-butanol-derived byproducts. Among the tested catalysts, gel-type resins with low crosslinking degree showed the highest activity, what could be attributed to a higher accessibility to active centers in polar medium. In additional experiments where initial reactants content was at stoichiometric relation, the levulinic acid conversion was lower (82-85%), while selectivity of 1-butanol towards the ester was slightly higher, because of the lower 1-butanol concentration. |
|---|