Terahertz carpet cloak based on a ring resonator metasurface
In this work we present the concept and design of an ultrathin (λ/22) terahertz (THz) unidirectional carpet cloak based on the local phase compensation approach enabled by gradient metasurfaces. A triangular surface bump with center height of 4.1 mm (1.1λ) and tilt angle of 20° is covered with a met...
| Autores: | , , , |
|---|---|
| Tipo de recurso: | artículo |
| Estado: | Versión publicada |
| Fecha de publicación: | 2015 |
| País: | España |
| Institución: | Universidad Pública de Navarra |
| Repositorio: | Academica-e. Repositorio Institucional de la Universidad Pública de Navarra |
| OAI Identifier: | oai:academica-e.unavarra.es:2454/38134 |
| Acceso en línea: | https://hdl.handle.net/2454/38134 |
| Access Level: | acceso abierto |
| Palabra clave: | Terahertz carpet cloak Ring resonators Radars Antennas |
| Sumario: | In this work we present the concept and design of an ultrathin (λ/22) terahertz (THz) unidirectional carpet cloak based on the local phase compensation approach enabled by gradient metasurfaces. A triangular surface bump with center height of 4.1 mm (1.1λ) and tilt angle of 20° is covered with a metasurface composed of an array of suitably designed closed ring resonators with a transverse gradient of surface impedance. The ring resonators provide a wide range of control for the reflection phase with small absorption losses, enabling efficient phase manipulation along the edge of the bump. Our numerical results demonstrate a good performance of the designed cloak in both near field and far field, and the cloaked object mimics a flat ground plane within a broad range of incidence angles, over 35° angular spectrum centered at 45°. The presented cloak design can be applied in radar and antenna systems as a thin, lightweight, and easy to fabricate solution for radio and THz frequencies. |
|---|